Manualshelf

Installation Guide

ManualsBrandsZoroufy ManualsHeating, Ventilation, and Air Conditioning4 in. x 10 in. Classic Floor Register, Antique Brass
1
P.O. BOX 620345 • MIDDLETON, WI 53562-0345 • PHONE 800-762-1525 • FAX 608-833-8797 • www. zorou f y.c om
Registers and Vents
© 20 06 ZO ROU FY
Surface mount regiSter inStallation inStructionS
1. Position your new register into the duct opening.
2. Gently press downward on the register to properly seat the unit squarely in the duct opening and flush with the floor surface.
3. Rotate damper control for desired air flow.
baSeboard diffuSer inStallation inStructionS
1. Open vent by separating face of vent from the base.
2. Place your new vent in desired position and install using screws appropriate for your wall material.
3. Position interior duct flap to create an opening for air flow.
4. Snap vent face onto base.
fluSh mount vent inStallation inStructionS
1. Place vent frame in desired position prior to installation of wood floor.
2. Fit wood flooring into the sides of the vent.
P.O. BOX 620345 • MIDDLETON, WI 53562-0345 • PHONE 800-762-1525 • FAX 608-833-8797 • www. zorou f y.c om
Registers and Vents
© 20 07 ZO ROU FY
Surface mount regiSter inStallation inStructionS
1. Position your new register into the duct opening.
2. Gently press downward on the register to properly seat the unit squarely in the duct opening and flush with the floor surface.
3. Rotate damper control for desired air flow.
baSeboard diffuSer inStallation inStructionS
1. Open vent by separating face of vent from the base.
2. Place your new vent in desired position and install using screws appropriate for your wall material.
3. Position interior duct flap to create an opening for air flow.
4. Snap vent face onto base.
fluSh mount vent inStallation inStructionS
1. Place vent frame in desired position prior to installation of wood floor.
2. Fit wood flooring into the sides of the vent.

Summary of content (1 pages)