Instructions / Assembly
The system may not include Hard Disk, it’s depending on the kit you selected. This system works with
most 3.5” SATA Hard Disk or 2.5” SATA Hard Disk.
Note: if your system has preinstalled hard disk, please skip this step.
Note:
Aer installing a hard disk, you need to first format the Hard Disk before recording.
Right click the mouse > go to Main Menu > Disk Mangaement > Select the Hard Disk > Click
Format > Apply.
③ Place the hard disk into the NVR. Any cable should cross up over the hard disk.
④ Holding the hard disk and the NVR, gently turn it over and line up the holes on the hard disk
with the holes on the NVR. Using a Phillips screwdriver, screw the provided screws into the holes.
Assemble the cover.
① Unplug your NVR from power, unscrew and remove the top cover.
Install a Hard Disk
② Connect the SATA power and data cables from the NVR to the corresponding ports on your hard
disk as shown.
8