User Guide

4
Mounting the Camera
The camera can be mounted onto a at, vertical surface using screws. The surface must have
sufcient strength to hold the camera. Materials such as hardwood, brick or masonry are good
options, You can mount the camera onto a metal surface, but you’ll need to supply your own
mounting hardware.
Power
Connector
Video
Connector
Infra-red
LEDs
Camera
lens
Please note, model shown is for
illustration purposes only.
Positioning the Cables
1.When running your cable, try to avoid
bending it at sharp angles.
2.Don’t put your cable near live electrical
wiring. AC electricity generates radio
“noise” which can interfere with the
signal from your camera.
3.All wiring and connectors must be
suitably insulated and protected from
moisture and sunlight because they are
not weather resistant.