User Guide

4
Mounting the Camera
To disassemble the camera:
Take the bottom part of the
camera apart, by twisting
the bottom plate off in a
counter clock wise motion.
After unlocking your outer
ring will come off. Then take
the casing off.
To mount the camera:
Position the camera in the location you want
to mount it, and mark the screw holes on the
surface to position the screws. Then, using
appropriate screws for the surface you’re xing
the camera to, screw the camera into place.
If you’re mounting to a wooden surface, then
screw the camera directly to the surface.
If you’re mounting to a masonry surface (bricks,
concrete or similar) then you’ll need to use the
included wall plugs.
To aim the camera:
The dome cover (3) can
be rotated left or right.
The camera can be aimed
in almost any direction
from wherever you choose
to mount it.
(3)