User Guide

ManualsBrandsZOSI ManualsElectronics8ch 1080p Security Camera System with Hard Drive 2TB,5MP Lite 8 Channel H.265+ CCTV Video DVR Recorder and 8pcs 1920TVL Outdoor Home Surveillance Cameras,120ft Long Night Vision,Motion Alerts

Quick Start Guide

PROFESSIONAL SECURITY MADE EASY

The system may not include Hard Disk depending on the kit you selected. This system works with most 3.5”

SATA Hard Disk or 2.5” SATA Hard Disk.

1. Install a Hard Disk (if your system has preinstalled Hard Disk, please skip this step)

2. Record video

Right click mouse > Go to Main Menu > Setup > Record

You shall see the record settings for all channels. Change the record setting according to your preference and apply the

changes.

Note:

After installing a Hard Disk, you need to first format the Hard Disk before recording.

Right click the mouse > go to Main Menu > Disk Management > Select the Hard Disk > Click Format > Apply.

Note:

Recording Priority: Alarm Recording > Motion Detection Recording > Manual Recording > Time Scheduled Recording.

Get into system Main Menu > Search, system presents picture as following.

①

Unplug your DVR from power, unscrew and remove the top cover.

②

Connect the SATA power and data cables from the DVR to the corresponding ports on your Hard Disk (as shown).

③

Place the Hard Disk into the DVR. Any cable should cross up over the Hard Disk.

④

Holding the Hard Disk and the DVR, gently turn it over and line up the holes on the Hard Disk with the holes on the

DVR. Using a Phillips screwdriver, screw the provided screws into the holes. Assemble the cover.

4. Record video

5. Playback video

6. Motion Detection

8. Backup the video for memory

9. Upgrade the DVR

①

③

②

④

Select the channel

Start playing

Search the video you want via time or Event, then play it.

Previous Record: Move to last recorded event

Next Record: Move to next recorded event

Fast Forward: video can be played at different speed, from

1/4 times to 16 times.

Rewind: Video play can be rewinded at 1 time, 8 times, 16

times and 32 times.

Screen Display Mode: Both single-screen and multi-screen

are available. You can choose how many channels you want

to playback one time.Channel without records presents

blank screen.

Previous Record

Next Record

Rewind

Fast

Forward

Play/Pause

Next frame

frame

Single-screen display

Multi-screen display

Select Camera. Tick the Channel you want to record on

motion detection.

Holding Time. Set recording time length after motion stop.

Trigger. Multi-channels can be set to record when detect

the motion by one of cameras.For example,when camera 1

detects motion,camera 2 and camera 3 can be triggered to

record as well.

Area. It is allowed to set sensitivity area of camera viewing

range.

Click STAR

to make the whole viewing range as

sensitivity area;

Click Trash Box

to remove sensitivity area;

Click and drag mouse to draw or erase the sensitive area.

Set motion Detection,DVR will record only when motion or movement is detected.

Right click mouse > Main Menu > Setup > Alarm > Motion > Motion detection.

The system records when motion is detected by the camera.

An icon is shown when motion is detected.

1. Plug an USB flash disk to your DVR’s USB port.

2. Right click the mouse > Main Menu > Backup > choose the channel and time period > Search > Choose the video clips

you want to backup > Click Backup.

Click to save setting

Click to exit

If your DVR need to upgrade , please contact us to get a

upgrade software.

Step 1. Put software into U-Disk, and ensure software is

at root directory as below.

Step 2. Put U-Disk into DVR port USB2.0.

Unplug the mouse from the front USB socket.

Step 3. Restart DVR(Power off and on), it will be

upgraded automatically.

Note: Please wait for a few minutes until DVR

interface presents.

As Color and luminance is important for sensitivity, so it's necessary to adjust its value at specific conditions. The default

value is 4 while value range is from 1 to 8.

Right click mouse to show or hide control menu at screen bottom.

Test the setting by moving something or some one walk through grid area within camera view range. If DVR detects

movement within grid area, a yellow hunanoid figure would be presented in the screen. The grid could not cover flag,

trees or some other flow objects in the wind to avoid false alerts.

Set Time scheduled record, you may configure each channel to record at specific times based on time of day.

Right click the mouse > go to Main Menu >Setup > Schedule.

The schedule for automatic recording can be set either of two ways.

1. By highlighting individual hours for specific days

by using the pencil tool in the upper right of the

window. The adjacent eraser tool

removes the

highlighting in a block. click on either the pencil or

eraser tool to turn them off.

Settings can be copied and applied to any or all of the

channels and to any other day.

2. Blocks of time to be recorded can also be set up by double clicking on a field adjacent to a day. Multiple schedules

can be created and saved with start and stop times down to the minute. These can then be applied to multiple days and

cameras.

REC

ZS V16.9

7. Time scheduled Record