User Manual
1
Introduction
Thank you for purchasing this CCTV camera from
ZOSI. This camera can operate in almost all light
conditions, from bright daylight (provided it’s not
irradiated directly by the sun) to pitch darkness.
The camera is very sensitive to light and therefore can
make use of even a tiny little of light to create an image
of what it captured. When it is in low light, this comes
out as a black and white image.
In total darkness or near-total darkness environment,
the camera uses built-in infrared LEDs to illuminate
the area in front of it. This light is invisible to the
human eye, although you might notice a faint red glow
coming from the front of the camera, which is normal
phenomenon.
In day or well-lit environment, the IR Cut Filter feature
of the camera can lter out wavelengths of light that
is useless to cameras in order to provide a clear color
image.
Important note
：
All jurisdictions have specic laws and
regulations relating to the use of came-ras. Before
using any camera for any purpose, it is the buyer’s
responsibility to be aware of all applicable laws and
regulations that prohibit or limit the use of cameras.
And also buyer must comply with the applicable laws
and regulations.
Warning：Modications not approved by the party
responsible for compliance could void user’s authority
to operate the equipment.
Important safety instructions
1) Make sure product is installed correctly and fastened
stably.
2) Do not operate it if wires and terminals are exposed.