Specifications

Installing the CPU Fan

There are many different fan types that can be used with this motherboard. Follow the instruction

that came with your fan assembly. Be sure that the fan orientation is correct for your chassis type

and your fan assembly.

Installing Memory Modules

Your new motherboard has two 1.8V 240-pin slots for DDR2 (G41ITX-A)/1.5V 240-pin slots

for DDR3 (G41ITX-B) memory modules. These slots support 512 MB/1 GB/2 GB/4 GB DDR2

(G41ITX-A)/1 GB/2 GB/4 GB DDR3 (G41ITX-B) technologies. They also support dual channel

DDR2 (G41ITX-A)/DDR3 (G41ITX-B) memory technology up to 10.7 GB/s. There must be at

least one memory bank populated to ensure normal operation. Refer to the following recommen-

dations to install memory modules.

q One DIMM: Install it into slot 1 or 2. You can install the DIMM into any slot, however, slot 1

is preferred.

q Two DIMMs: Install them into slot 1 and slot 2.

Note that a memory module has a notch, so it can only t in one direction. Refer to the following

procedure to install memory modules into the slots on the motherboard.

1. Unlock a DIMM slot by pressing the module clips outward.

2. Align the memory module to the DIMM slot, and insert the module vertically into the DIMM

slot. The plastic clips at both sides of the DIMM slot automatically lock the DIMM into the

connector.

DDRII1/DDRIII1

DDRII2/DDRIII2

Hardware Installation