User Manual
2. Installing the Graphics Card
Important!
Read the precautions before starting the installation
For system without an existing graphics card
1. Shut down the system and unplug the power cable from the AC power source.
2. Open the system chassis to access the AGP or PCI Express slot. Refer to your system
manual for instructions.
3. Remove the metal bracket cover near the AGP or PCI Express slot. Save the screw for later
use.
4. Remove the graphics card from its anti-static packaging.
5. Hold the card rmly and insert its golden connectors into the AGP or PCI-Express slot.
6. Make sure that the card is properly seated in the slot, and then secure the card metal
bracket with a screw.
7. Connect the DC power plug from the system power supply unit if your card has an auxiliary
power connector (for specic cards only). Some models may come with a DC power cable,
which connects between the card and the system power supply unit.
8. Replace the system cover and re-connect all power cables.
6
Installing the Graphics Card
ZOTAC GRAPHICS CARDS
Fig 2-1 Insert the graphic card to the slot
ZOATC VGA Manual-english-Final-N6 6 2010-11-1 16:03:46