User's Manual

Web Control User Interface Setting
17
After clicking the “Rename” option, the “Rename” window show as follows, users can enter a new user
friend device name and click the “confirm” button to apply and save the setting.
3.3 Signal Input
After clicking the “Signal Input” button on the left column of the web page, user can see information about
the current detected input signal from “HDMI”, “SDI” and “Stream”, including Resolution and Frame Rate
input channel. In this example, the device doesn’t connect to the SDI signal. The resolution of video input
by HDMI is 1080P.
Stream: Select “Network Stream” at Stream Type, paste RTMP or RTSP address at Pull Url.
Note: when choose HDMI and SDI input, the router function is unavailable.