User's Manual

Web Control User Interface Setting
30
Local Upgrade – please press the “Choose file” button to select a firmware firm from PC/laptop. After the
firmware is selected, please press the “Confirm” button to start the firmware update procedure. Keep
network connected while upgrading, do not power off. encoder will reboot when upgrade is successful.
Upgrade Online–please press the “Check” button to check current version first. After detecting a new
version, please press the “Confirm” button to start the firmware update procedure. Keep network
connected while upgrading, do not power off. Encoder will reboot when upgrade is successful.
3.12 Language
After clicking the “Language” option on the left column of the web control UI, users can see the Language
option control page. Once the language is changed, don’t forget to click the “confirm” button to apply and
save the setting.
3.13 Recovery
After clicking the “Recovery” option on the left column of the web control UI, users can see the Recovery
option control page.
Shutdown
Press the “Shutdown” button to shut down the encoder.
Restart
Press the “Restart” button to restart the Encoder.
Recovery
Press the “Recovery” button to restore encoder to factory status.