User's Manual

General
1
Chapter 1 General
1.1 Overview
Thank you for purchasing LiveV400 – HD Live Streaming Encoder. The LiveV400 is a portable
standalone, hardware-based video streaming encoder that can be mounted on top of the
cameras or carried on a backpack. LiveV4X0 can encode and transmit video of camcorder or
camera via WIFI or LAN to the cloud server in real-time for live broadcasting.
It is a high definition, bonded dual video input streaming encoder plus video router. It is cost
effective, easy to use, with tripod mount, supports modern USB Type-C charger and a range
of innovative features.
The LiveV400 offers 1 built-in WIFI and 1 Gigabit Ethernet port. Convenient users in indoor, outdoor
and other bad situations live. In addition, the LiveV400 offers aggregation capabilities that
aggregate LAN, WIFI, adaptive link quality, and joint push. And after aggregation can be distributed
9 RTMP streams.
LiveV400 has 4.3” touch screen and user-friend operation and video and camera collage preview, live video
switch, setup, status. It has full touch screen UI and full control of encoder. PC, phone and remote web
encoder and settings are also supported.
LiveV400 supports dual 1080P HD video signal input, supports a variety of video graphics puzzles
including two video seamless switching, picture-in-picture and so on, up to 6 different live display
combinations, and also provides 2 user-defined video puzzles, can freely adjust HDMI and SDI dual
video display size, location and so on.
LiveV400 uses efficient H.264 digital audio and video hardware encoding, encoding compressed
video circulation too much network aggregation RTMP push to the server platform, replacing the
traditional PC and video acquisition card, without the need for special PC software.
The LiveV400 provides multiple network channels, and when a network connection fails, the device
automatically selects other available network push streams that are connected, without additional
setup by the user. In addition, when the bandwidth of the push streaming network is less than the
set target code rate, the user can choose to use the aggregation mode to push the stream, the
encoder aggregates multiple networks to push the stream together, to achieve the set target code
rate.