Hardware Guide
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
FIBOCOM SQ808-NA Hardware Guide Page 61 of 78
6 WIFI and Bluetooth
6.1 WIFI Overview
The module supports 2.4G and 5G WLAN wireless communications and 802.11a, 802.11b, 802.11g,
802.11n, 802.11ac standards, with a maximum speed up to 433Mbps. Its characteristics are as follows:
➢ Support Wake-on-WLAN (WoWLAN)
➢ Support ad hoc mode
➢ Support WAPI
➢ Support AP mode
➢ Support Wi-Fi Direct
➢ Support MCS 0-7 for HT20 and HT40 (If you need to open 2.4G WIFI 40M, you need to configure
the ini file, it is not recommended to use)
➢ Support MCS 0-8 for VHT20
➢ Support MCS 0-9 for VHT40 and VHT80
6.2 WIFI Performance
Test condition:3.8V power supply, environment temperature 25°C
Table 6-1 WIFI transmit power
Frequency
Mode
Date Rate
Bandwidth(MHz)
TX Power(dBm)
2.4G
802.11b
1Mbps
20
17.0±3
11Mbps
20
17.0±3
802.11g
6Mbps
20
16.0±3
54Mbps
20
13.0±3
802.11n
MCS0
20
15.0±3
MCS7
20
12.0±3
MCS0
40
15.0±3
MCS7
40
12.0±3