Specifications

Jets 1
Aux
Light
Up
Down
TM
Engineered With Visual Illumination
Visual Diagnostic System
Blower
Jets 1
Aux
Light
Up
Down
TM
Engineered With Visual Illumination
Visual Diagnostic System
Blower
If the display shows a constant 32 degree F or 125 degree F (0 degree C or 52 degree C) and this is not
the actual temperature or the displayed temperature greatly differs from the actual spa water
temperature, a problem with the water temperature sensor has occurred. (Contact manufacturer).
ERROR IDENTIFICATION
High Temperature
If 3 flashing dots below the temperature display and the temperature displayed is 115 degrees F (46
degree C) or higher, and over temperature condition and a need for service has occurred. (Contact
manufacturer).
NOTE: If you notice the pump coming on for seemingly no reason throughout the day, the system may
be in “Smart Winter Mode”. If you cannot control some functions of the spa be sure to check to see if
the Filtration indicator is illuminated. The spa may be in the midst of a filtration cycle. Freeze
Protection and Over temperature condition will also limit or disable spa functions.
11
117117
3232