Specifications

CS6230-EX Control Equipment Pack System Wiring Directions
Remove 2 screws from cover panel
figure 1 and open carefully and put
aside.
Route the electrical wires through
conduit of the equipment pack and
attach wires as shown in figure 2 to
proper connectors.
Blue
Green
Yellow
Brown
Connector
Wirin
g
D
irections
Pressure
Switch and
Adjustment
Screw At Top.
Fuses - SC-25
Figure 1
Figure 2
Panel Screws
Pump 1
Pump 2
Air
Ozone
Aux
Heater
Indicator Light
CONTROL SYSTEM DIAGRAM
Heater Tube
and Element
WARNING: FILL THE SPA WITH WATER BEFORE TURNING ON THE POWER.
Once your spa has been filled with water, turn it on and test all of the circuit breakers.
5