User's Manual

RF Energy Exposure Information
RF Energy Exposure Awareness And Control
Information For Fcc Occupational Use Requirements
I before using the DIGITAL MOBILE RADIO, review the following important RF energy awareness
and control information and operational instructions. Comply with this information and
instructions in order to ensure compliance with RF exposure guidelines.e the capability to
access information in that form.
Changes or modifications not expressly approved by ZTE TRUNKING TECHNOLOGY
CORPORATION could void the user's authority to operate the equipment.
This DIGITAL MOBILE RADIO uses electromagnetic energy in the radio frequency (RF)
spectrum to provide communications between two or more users over a distance. It uses RF
energy or radio waves to send and receive calls. RF energy is one form of electromagnetic
energy. Other forms include, but are not limited to, electric power, sunlight, and x-rays. RF
energy, however, should not be confused with these other forms of electromagnetic energy,
which, when used improperly, can cause biological damage. Very high levels of x-rays, for
example, can damage tissues and genetic material.Experts in science, engineering, medicine,
health, and industry work with organizations to develop standards for exposure to RF
energy.These standards provide recommended levels of RF exposure for both workers and
the general public. These recommended RF exposure levels include substantial margins of
protection. All two-way radios marketed in North America are designed, manufactured, and
tested to ensure they meet government-established RF exposure levels. In addition,
manufacturers also recommend specific operating instructions to users of two-way radios.
These instructions are important because they inform users about RF energy exposure and
provide simple procedures on how to control it. Refer to the following websites for more
information on what RF energy exposure is and how to control exposure to assure compliance
with established RF exposure limits:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
http://www.osha.gov./SLTC/radiofrequencyradiation/index.html
Federal Communications Commission Regulations
Before it was marketed in the United States, the DIGITAL MOBILE RADIO was tested to
ensure compliance with FCC RF energy exposure limits for two-way portable radios. When
two-way radios are used as a consequence of employment, the FCC requires users to be fully
aware of and able to control their exposure to meet occupational requirements. Exposure
awareness can be facilitated by the use of a label directing users to specific user awareness
information. The radio has an RF exposure product label.Also, the Product Safety Manual and
this Operator’s Manual include information and operating instructions required to control RF
exposure and to satisfy compliance requirements.
Operation Safety Recommendations
Occupational Safety Guidelines And Safety Training Information