A101ZT,A102ZT Let’s Go Getting started with your device.
1. Prepare A valid nano-SIM card.
2. Install the Battery 1. Open the back cover. 2. Insert the battery. 3. Put the cover back.
3. Insert the nano-SIM Card 1. Insert the tip of the tray eject tool into the hole. 2. Pull out the card tray and place the nano-SIM card on the tray, as shown. Carefully slide the tray back into place.
4. Start Your Device Press and hold the power button until the screen lights up and then the device will connect to the Internet automatically. NOTE: If the battery is extremely low, you may be unable to power on the device. Please charge your device first.
5. Access the Internet Wi-Fi: Touch the icon on the screen to get the default Wi-Fi SSID and password. Connect to the Wi-Fi network with your mobile deviceand then access the Internet. USB Type-C cable: Connect with the computer via USB port and then access the Internet.
6. Change Your Device Settings You can change the device settings by logging in to the configuration web page. 1. Touch >Advanced Setting to get thedefault device manager website URLandpassword. 2. Launch the Internet browser. Enter the URL in the Address bar. 3. 4. Click Login. Input the password, click Login and then you can change the default settings. NOTE: You can also change some settings by touching the screen.
7. E-label You can touch the Support icon on the screen to get the E-lable information.
Touch Screen Icons and Interfaces 9
1. 2. 3. Power button nano-SIM card tray Touch screen icons Press and hold for about 2 seconds to power on your device. Insert your nano-SIM card. Description Signal strength Network type Wi-Fi signal strength Internet connection status New software available. Battery power level Set whether data usage is displayed on the screen and the max data amount. View the connected devices. View and delete the notification. Show the number of unread notifications.
View or change your device settings. Use the WPS function. Show your device information. Describe the icons displayed on the screen. 4. Charging/USB Charge the device or connect to the USB port Type-C jack of a computer.
Troubleshooting Problem Recommended Action The If the driver of your device is abnormal, connection reinstall the software. You need to between your uninstall the software first. device and a PC through a USB cable cannot be established automatically. The connection between your enabled. device and a client through Wi-Fi Refresh the network list and select the correct SSID. cannot Check the IP address, and ensure that your client can automatically be established.
Troubleshooting Problem The Recommended Action client connected the to device available. cannot access the Internet. Ensure that your nano-SIM card is Change the location and find a place with good signal. Check the settings of the WAN connection mode. Contact your service provider and confirm your APN settings. The Enter the correct address. Please configuration view the label on your device to get page the default Device Manager Website cannot be visited. IP address.
Get More Help You can get help by: •Sending an email to mobile@zte.com.cn • Visiting www.ztedevices.
LEGAL INFORMATION Copyright © 2021 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice.
Warning and Notice To the User • • • • • • • If inadequately shielded, some electronic devices, for example, the electronic system of vehicles, may be affected by the electromagnetic interference caused by the device. Consult the manufacturers of such devices before using the device if necessary. Operating the device may interfere with medical instruments such as hearing aids and pacemakers.
• • • • • • • • • • When the device is operating, do not touch the metallic parts. Failing to do so may cause burns. Use original accessories or accessories that are authorized. Using any unauthorized accessories may affect the performance of the device and violate the related national regulations about telecom terminals. Avoid using the device near or inside metallic constructions or establishments that can emit electromagnetic waves, because signal reception may be affected.
• • • • • • • • • • The recommended operating temperatures are 0 °C to 35 °C and the storage temperatures are -20 °C to +45 °C. Extreme temperatures can damage the device and reduce the charging capacity and lifespan of your device and battery. Do not place the device or the battery in or near heating equipment, such as microwave ovens, stoves or radiators. Keep the device and the battery away from excessive heat and direct sunlight.
Limited Warranty This warranty does not apply to defects or errors in the product caused by: i. Reasonable abrasion. ii. End users’ failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the product. iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual. v.
• • • • • • • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
FCC RF Exposure Information (SAR) • This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. • • • • • • • • During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm.
information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: SRQ-A101ZT. • • • • • • For this device, the highest reported SAR value for near the body is 0.89W/kg. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement.
ZTE CORPORATION NO. 55, Hi-tech Road South, Shenzhen, P.R.