ZTE A302+ GSM Dual-band Digital Mobile Phone User Manual
Copyright © 2008 by ZTE Corporation All rights reserved No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE operates a policy of continuous development. We reserve the right to update the technical specifications in this document at any time without prior notice. Release: V1.
Contents General Information ...................................................................7 Welcome ................................................................................................... 7 Security ..................................................................................................... 7 Safety Precautions.................................................................................... 8 Getting Started ...................................................................
Contents Making a Call...........................................................................................27 Answering a Call......................................................................................28 Call Menu.................................................................................................29 Function Menu ......................................................................... 31 Usage and Structure of Function Menu ...................................................
Contents Clock settings................................................................................. 41 Call settings.................................................................................... 41 Fixed dialling number..................................................................... 42 Service dialling number.................................................................. 43 Network setting ..............................................................................
Contents Used space.....................................................................................52 Delete all SIM contacts ...................................................................52 Text Input ................................................................................. 53 Overview..................................................................................................53 ABC and abc Mode .................................................................................
Welcome General Information Thank you for using ZTE A302+ GSM Dual-band digital mobile phone. To guarantee the mobile phone always in its best condition, please read this manual carefully and keep it for further use. The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your mobile phone.
General Information Safety Precautions This section includes some important information on safe and efficient operation. Please read this information before using the phone. Operational Precautions Please use your phone properly. When making or receiving a call, please hold your phone as holding a wireline telephone. Ensure the phone is at least one inch (two point five centimeters) from your body when transmitting. Do not touch the antenna when the phone is in use.
General Information Keep the phone out of the reach of small children. The phone may cause injury if used as a toy. Precautions While Driving Please pay attention to the traffic safety. Check the laws and regulations on the use of your phone in the area where you drive. Always obey them. Use hands-free function of the phone, if available. Pull off the road and park before making or answering a call if conditions require.
General Information If you use any other personal medical device, please consult the manufacturer of your device to determine if it is adequately shielded from RF energy. In those facilities with special demand, such as hospital or health care facilities, please pay attention to the restriction on the use of mobile phone. Switch off your phone if required. Mobile Phone Please use original accessories or accessories approved by the phone manufacturer.
General Information Using the phone near electrical appliances such as TV, telephone, radio and personal computer can cause interference. Do not expose your mobile phone to direct sunlight or store it in hot areas. High temperatures can shorten the life of electronic devices. Keep your phone dry. Any liquid may damage your phone. Do not drop, knock or harshly treat the phone. Rough handling can break internal circuit boards. Do not connect the phone with any incompatible enhancement.
General Information To avoid possible interference with blasting operations, switch off your phone when you are near electrical blasting caps, in a blasting area, or in areas posted “Turn off electronic devices.” Obey all signs and instructions. Precautions for Electronic Devices Some electronic devices are susceptible to electromagnetic interference sent by mobile phone if inadequately shielded, such as electronic system of vehicles.
General Information Please turn off your mobile phone at a refueling point, and the same to the place where the use of two-way radio is prohibited. Aircraft Safety Please turn off your mobile phone before the airplane takes off. In order to protect airplane’s communication system from interference, it is forbidden to use mobile phone in flight. Using mobile phone before the plane taking off should get aircrew’s permission according to safety regulations.
General Information Do not disassemble or refit the battery. Otherwise, it will cause liquid leakage, overheating, explosion and ignition of the battery. Please store the battery in a cool dry place if you don’t use it for a long period. The battery can be recharged for hundreds of times, but it will eventually wear out. When the operating time (talk time and standby time) is noticeably shorter than normal, it is time to replace a new one.
Getting Started Key Definition Left soft key Perform the function in the lower left corner of the screen. Right soft key Perform the function in the lower right corner of the screen. Dial key Make or answer a call. Bring out call menu in the standby mode. End key End or reject a call. Power on/off. Return to the standby mode in the menu interface. Scroll key Scroll the phone number list or setting options. Roll the cursor up and down when editing.
Getting Started Left / Right key: Roll the cursor left and right when editing. They could be set as shortcut keys in the standby mode and direction keys in games. OK key: The middle key within the scroll keys, which is usually used to confirm the operation. - 0 - 9 Number keys Enter numbers and characters. One-touch dials. Select options when entering menu. They could be set as direction keys in games. * key and # key They have different functions in different modes or function menus.
Getting Started Display Symbols Signal strength. Keypad locked. Roaming. New message. No space for messages when blinking. Enable mute mode. Indicate the alarm clock has been set. Indicate battery level. Enable vibrating function.
Getting Started Technical Parameters Handset Type Dimensions(W×L×H) Weight Battery Continuous standby time Continuous talk time ZTE A302+ 46.8mm×108.2mm×12.8mm Approx. 48g (without battery) Approx. 90 hours - 130 hours (subject to network status) Approx. 2 hours - 4 hours (subject to network status) For other parameters about battery and charger, refer to their labels.
Getting Started Battery The accessory lithium battery of the handset can be immediately used after unpacking. A new battery will have the best performance after full charge/discharge cycles for the first three times. Removing & Installing the Battery Remove: Power off your phone. Push down the spring buckle up and slide down the cover and then lift the battery from the compartment to remove it.
Getting Started Install: Place the bottom of the battery into position, push down on the upper section of the battery until it clicks into place and then install the battery cover.
Getting Started Charging the Battery Plug the charger connector into the charge port at the bottom of the phone. (Note: Put upward the side with arrow.) Then plug the other end of the charger in an appropriate electrical outlet. Now, a charge indicator displays in the upper right corner of the screen. If the battery is charged in power-off condition, the indicator bar will scroll.
Getting Started When the battery is fully charged, the bar stops scrolling. Generally the whole charge process needs two to three hours (charge the battery for six to eight hours for the first three times). During the charge process, your phone, battery and charger may become hot, and this is a normal phenomenon. Disconnect the charger with the phone and the power outlet when charging finished. Warning: Put the phone at a ventilated place with temperature between + 5 °C ~+ 40 °C.
Getting Started Connecting to the Network SIM Card Insert the SIM card (Subscriber Identity Module card) into the phone. This SIM card can be used by any GSM mobile phone (A new phone can read the SIM card automatically). Don’t touch the metal contact area of the SIM card, doing so may cause information in the card lost or destroyed. Keep the card away from electricity and magnetism. Warning: Switch off your phone before changing the SIM card.
Getting Started Inserting & Removing SIM Card Switch off your phone, disconnect the outer power source and remove the battery. Insert the SIM card into the SIM card slot or pull it out from the slot. Switch on/off Your Phone Hold to power on/off the phone.
Getting Started if a SIM card password has been set. if a handset lock code has been set. search for the right network. Enter PIN 1 —— Enter Phone Code —— Searching —— Unlocking the SIM Card and Mobile Phone By setting a PIN 1 (personal identification number) code of the SIM card and the handset lock code, you can protect your SIM card and phone from illegal use. Method to unlock the SIM card: Enter the PIN 1 code and press the # key or Left soft key [OK].
Getting Started Connecting to the Network After the SIM card and the phone are unlocked, the mobile phone will automatically search for the network. After a few seconds, your phone will be registered on the network. Now your phone is in the standby mode. Besides receiving and sending calls, you can do the following things: Press the Left soft key to enter the function menu. Press the Right soft key to enter the Contacts.
Basic Operations Making a Call You can make or answer calls in the standby mode. The bar at the upper left corner of the screen shows the network signal strength. Making DDD: Enter the telephone number by Number keys (including the area code when making a long distance call), press Dial key to send a call. Press the End key to end a call. Dialing an extension number: Method 1: Dial the telephone exchange and then the extension number.
Basic Operations Dialing the number in the List: Generally, all calls you have made or received are saved in a list of the phone numbers. All numbers are grouped as Dialled Calls, Received Calls and Missed Calls. Your mobile phone lists all the numbers so that you can view all the call logs. When the list is full, old numbers will be deleted automatically. You can check the list by the following operations: View All calls by pressing the Dial key. View Contacts by pressing the shortcut keys you set.
Basic Operations Call Menu When in the in-call mode, you can enter the call menu by pressing Option. The operation methods are the same as those in function menu. Call menu can be seen only in the process of communication and those functions such as Call waiting, Call keeping, Multiparty requires support from the network. If you need those services, please contact your network service provider. You can do the following operations in the call menu: Mute: Stop sending local voice.
Basic Operations Keep one call from Multiparty. End up the current call and the hang-on calls. Some menu items can only appear in special cases. Menu items such as will appear only when the ongoing call and the hang-on call coexist at the same time.
Function Menu Usage and Structure of Function Menu Scrolling search function: Enter the Function main menu by pressing or the OK key in the standby mode. Press the Up/Down key to select in menu. In the function menu, you can select or quit some menus by pressing the Left soft key or Right soft key according to the prompt displayed on the screen. Menu Messaging If the network supports and you have subscribed this service, you can send and receive text short messages.
Function Menu received. The amount of messages that can be stored depends on the capacity of your SIM card. New message Set a message service center number before starting to send messages. In the message interface, select New message and press the OK key to access message input interface to write the message. (Please refer to Chapter 5 “Text Input”.
Function Menu screen after the message is sent successfully. Select to save messages to the Draftbox. The SMS centers of some countries and regions do not support messages longer than one hundred and sixty English characters. Save as draft Note: Inbox/Outbox Select to check received short messages; select to check the successfully outgoing messages saved in the SIM card, and use the key to select in the message list.
Function Menu Extract No.: Extract a number from the message text and list it on the screen. If you select one, the number will be displayed on the dialing interface for editing or dialing. Delete all: Delete all the received or saved messages. Draftbox Select Draftbox to check short messages which have been edited, yet not sent out, but saved in the SIM card, and use Up/Down key to select in the message list; press Options to do the following operations: Read: Read the message.
Function Menu out the preset template sentences. In this menu, you can edit or change phrases. Input the short message service center number (You must obtain this number from your service provider.), and then press to store the number. In the period of validity, the message center will repeat to deliver a message till it is received. Press the Up/Down key to select a valid time and then press to confirm. Note: This function requires the network to support.
Function Menu Voicemail Select and access Voicemail submenu: Select Get voicemail to check the voicemail box and listen to the voice message. Voicemail No.: Set the voicemail number. Cell Info. Press Select to set Subjects, Language or Service status. In Subjects interface, select Add subject to add subjects. Call Menu In the standby mode, press Menu, select Call Menu and then press the OK key to access the Call Menu interface. Calls View calls list Select All calls to view all calls list.
Function Menu Select Dialled calls to view calls that you have dialed. Select Missed calls to view the calls that you have received, but have not answered. In the calls list interface, press Options to access the detailed submenus: Send message: Send short messages to the number. The operation is the same as creating messages. Detail: View the detailed information of the call. Save: Save the number to the SIM card. Delete: Delete this entry.
Function Menu No reply: Divert calls when you are not able to answer the phone within a preset period. Unreachable: Divert calls when you are not in an area covered by your service network. Cancel all Use Scroll key to select Cancel all to cancel all diverts services. When you have set conditions and types of divert services, the following can be chosen: Activate: Only registered services are functional. Deactivate: Delete the divert service. Checking availability: Check the status of the recent service.
Function Menu Fax: Only divert faxes. Messages: Only divert short messages. All except messages: Diverts all services except short messages. Profiles In the standby mode, press Menu, select Profiles and then press the OK key to access the profile interface. Select Profiles: You can select the profile you need in this submenu. The profile options are: General, Meeting, Outdoor, Indoor and Headset (this option only appears when an earphone is inserted).
Function Menu Missed alert: Select to turn ON/OFF the tone when there is a missed call. Message alert: Select the alert tone type when a new message is coming or select to turn off the alert tone. Vibrator: Select to turn on/off the vibrator. Settings In the standby mode, press Menu, select Settings and then press the OK key to access the setting interface. Phone settings Select and enter the Phone Settings submenu. Language: Select the language for the display texts.
Function Menu after the screen is switched to the standby mode. You can unlock the keypad according to the prompt on the interface. Display settings Backlight: Select to turn on/off the light of screen’s background. Clock settings Date and Time: You can set date and time. Use the Scroll key to switch among day, month, year and time. Date can be set from January 1st, 2007 to December 31st, 2055. Time can be set from 00:00 to 23:59.
Function Menu Connected minder: Select to turn ON/OFF the alert ring when the call is connected. Call waiting: Select Activate/Deactivate to enable/disable this function; select Checking availability to query the current status. When enabled, the network will notify you of a new call if a new incoming call takes place during the current conversation. Please contact the network service provider for detailed usage. Hide my number: Select ON/OFF to enable/disable this function; or select Set by network.
Function Menu Service dialling number The service number has been preset in the SIM card by the network service provider. The service dialling number can be checked or dialled, however, these numbers can not be modified or deleted. Network setting In this menu, you can select Automatic/Manual to select the network service provider according to requests.
Function Menu The SIM password (PIN 1 code) can prevent your SIM card from illegal use. Select to enable or disable the SIM password protection; select to set a new PIN 1 code. Three consecutive incorrect PIN 1 code entries will lock the SIM card. Then, the PUK code is needed to unlock the SIM card. The PIN 1 code and the PUK code may be provided to you together with the SIM card. If not, please contact with your network service provider. Please change it with your own private password as soon as possible.
Function Menu All except home: Bar international calls except local call. Incoming calls: Bar all incoming calls. Incoming if abroad: Bar all incoming calls when roaming abroad. Outgoing calls: Bar all outgoing calls. After choosing one of the above options, choose Select to restrict any of the following services: All services: Restrict incoming calls, voice calls and short messages. Voice calls: Restrict voice calls only. Data: Restrict data only. Fax: Restrict faxes only.
Function Menu Cancel all: Select Cancel all to cancel all call restrictions setting. Note: You need to input the network password to set or cancel network restrictions. Three consecutive incorrect password entries will lock the call restrictions service. Please contact network service provider to unlock it. Factory settings In this menu, you can select to restore the related settings of the phone to factory settings.
Function Menu List alarms: Select List alarms submenu, you can use the Up/Down key to view alarm clocks settings. Press Options to enter the setting screen, select Edit to edit the alarm clock settings, or select Delete to delete it, or select Enable/Disable to enable/disable it. Clear all: Select Clear all to clear all the alarm clocks. Define rest day: Select Define rest day to set or change rest days within a week. Workday alarm will not ring on the defined rest day(s).
Function Menu Note: This calculator has limited accuracy and rounding errors may occur especially in long division. World clock The World clock function provides time information on major worldwide cities. You can view the time of the desired city by using the Left/Right/Up/Down key on the navigation screen of World Time. Press the Left soft key [Save] to save the selected city time as new local time of the phone. Press the Right soft key [Back] to quit.
Function Menu Games In the standby mode, press Menu, select Games and then press the OK key or the Left soft key to access the games interface. Push box: The options are as follows: New game: Start a new game. Load game: Reload the last saved game. Help: Check the rules and instructions of the game. STK (SIM Toolkit) In the standby mode, press Menu, select STK and then press the OK key to access the STK interface. This service requires the network service provider’s support.
Function Menu Contacts In the standby mode, press the Right soft key to access the Contacts interface. It prompts Contacts empty when there is no record in the Contacts, you can press the Left soft key to add records. Saved records will be listed in the contacts list and ordered by the first character of the name. View the records by pressing the Up/Down key, and then press the Dial key to dial the number.
Function Menu that in the standby mode, if you hold this corresponding number key, the phone will dial the number automatically. Press Delete to cancel the setting. Add new contact In the contacts list interface, press Options and select Add new Contact. Enter the phone number you want to add. Enter the name of the number you want to add. Press OK to store the contact into the SIM card. Edit In the names list interface, press Options and select Edit. You can edit the current Contact record.
Function Menu Search In the names list interface, press Options, select Search and then enter the name you want to search. Quick-search: In the contacts list interface, you can press the number keys to go to the record of the name with the similar initial character. Sort principle: Sort by ASCII Code in English mode. Match principle: If match, go to the character; if not, go to the next. Speed dial list List the speed dial number.
Text Input Overview Your mobile phone provides the following input methods: upper and lower case input, numeric input and predictive text input, punctuation mark or special characters input. When you are in a field that allows characters to be entered, you will notice the text input mode indicator in the upper left corner of the screen. Press the # key to switch among different input modes. ABC and abc Mode Use the number keys from 2 to 9 to enter your text.
Text Input 123 Mode The 123 mode enables you to enter numbers in a text message. Press the keys corresponding to the required digits. Eng Mode It is a Predictive text input mode. You can enter any letter with a single key press. Predictive text input is based on a built-in dictionary. To write the desired word, press the keys 2 to 9. Press each key only once for one letter. For example, to write “book”, press 2 for B, 6 for O twice, 5 for K.
Text Input key Corresponding Characters 1 2 3 4 5 6 7 8 9 0 * key 1 and some common symbols ABCabc2 DEFdef3 GHIghi4 JKLjkl5 MNOmno6 PQRSpqrs7 TUVtuv8 WXYZwxyz9 Space 0 Press * key to bring out symbol entering.
Text Input # key Up/Down key Left/Right key End key Switch among different input modes. Roll the cursor up/down. Roll the cursor left/right.
Troubleshooting This section describes how to troubleshoot some problems when they occur to your phone. If you cannot deal with them, contact your local dealer. “Enter PIN 1 code” is shown when the phone is switched on. Input the PIN 1 or input the new PIN 1 if you have changed the code. The code can be set “off” if you do not want to input. “Insert SIM” is shown when the phone is switched on. Turn off your phone and make sure that you have inserted a valid SIM card.
Troubleshooting A phone call cannot be answered. Check whether call restriction is set to the number. Short message cannot be sent. Check the Message center setting in the Messaging-Msg settings. Some menus related to voice setting cannot be used. Check the Profiles.
Health and safety information The phone with internal antenna has been tested for compliance with FCC RF Exposure (SAR) limits and is complied with FCC RF exposure compliance requirements. Exposure to radio frequency energy Radio wave exposure and Specific Absorption Rate (SAR) information The handset is designed to comply with safely, requirements for exposure to radio waves.
user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.