ZTE CORPORATION A36+ GSM Dual-band Digital Mobile Phone User Manual 1
Copyright © 2007 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE operates a policy of continuous development. We reserve the right to update the technical specifications in this document at any time without prior notice. Release V 1.
Contents GENERAL INFORMATION........................................................................................................ 4 WELCOME .................................................................................................................................... 4 SECURITY ..................................................................................................................................... 4 SAFETY PRECAUTIONS.......................................................................
General Information Welcome Thank you for using ZTE A36+ GSM digital mobile phone. To guarantee the mobile phone always in its best condition, please read this manual carefully and keep it for further use. The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your mobile phone.
In those facilities with special demand, such as hospital or health care facilities, please pay attention to the restriction on the use of mobile phone. Switch off your phone if required. Mobile phone Please use original accessories or accessories approved by the phone manufacturer. Using any unauthorized accessories may affect your mobile phone’s performance, damage your phone or even cause danger to your body and violate related local regulations about telecom terminals.
If the mobile phone comprises the function of automatic timing power-on, please check your alarm setting to ensure that your phone will not be automatically turned on during flight. Battery Use Do not short-circuit the battery, as this can cause overheating to bring about fire. Do not store battery in hot areas or throw it into fire. Otherwise, it will cause explosion. Do not disassemble or refit the battery.
-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Warning: If the battery is damaged, do not discharge it. If the leakage does come into contact with the eyes or skin, wash thoroughly in clean water and consult with a doctor.
Getting Started Key Definition Left soft key Perform the function in the lower left corner of the screen. Right soft key Perform the function in the lower right corner of the screen. Dial key Make and answer calls. Bring out call menu in the standby mode. End key End or reject a call. Power on/off. Return to the standby mode in the menu interface. Scroll key Up/Down key: Scroll up and down in the contacts list or setting options. Move the cursor up and down when editing.
Technical Parameters Handset Type ZTE A36+ Dimensions(L×W×H) 107.6mm x 47mm x 13.8mm Weight Approx. 48 g (without battery) Battery Continuous standby time Approx. 90 hours ~ 130 hours (subject to network status) Continuous talk time Approx. 2 hours ~ 4 hours (subject to network status) For other parameters about battery and charger, refer to their labels. Battery The accessory lithium battery of the handset can be immediately used after unpacking.
Plug the charger connector into the charge port at the bottom of the phone. (Note: Put upward the side with arrow.) Then plug the other end of the charger in an appropriate electrical outlet. Now, a charge indicator displays in the upper right corner of the screen. If the battery is charged in power-off condition, the indicator bar will scroll. If the phone is over-used in shortage of battery or not used for a long time, it will take a few minutes for the indicator bar to show.
protect your SIM card and phone from illegal use. Method to unlock the SIM card: Enter a PIN 1 code and press the # key or Left soft key [OK]. If you enter an incorrect PIN 1 code three times in a row, your SIM card will be locked by the network and the phone will ask for PUK code instead. Note: Your service provider will set a standard PIN 1 code (four to eight digits) for your SIM card; please change it with your private password as soon as possible.
key and Right soft key ) to answer a call. Call Menu In the in-call mode, you can enter the call menu by pressing Options. The operation methods are the same as those in the function menu. Call menu can be seen only in the process of communication. The functions such as Call waiting, Call keeping, Multiparty require the network support. If you need those services, please contact your network service provider. If you won’t answer the call, press Busy to send busy tones to the caller.
In the standby mode, press Menu, select Call Menu and then press the OK key to enter the Call Menu interface. Calls View calls list Select All calls to view all calls list. Select Received calls to view the calls that you received. Select Dialled calls to view calls that you have dialed. Select Missed calls to view the calls that you received, but have not answered. In the calls list interface, press Options to enter the detailed submenus: ¾ Send message: Send short messages to the number.
Press the Up/Down/Left/Right key to switch among +, -,×, ÷ Press 0~9 Number keys to input numbers, and press the * key negative number can come. Press the Right soft key to clear last digit and results. Press the End key to exit the calculator. Press the Left soft key [Equal] to get results. Note: This calculator has limited accuracy and rounding errors may occur especially in long division. World clock The world clock function provides time information on major cities worldwide.
Messaging If the network supports and you have subscribed this service, you can send and receive text short messages freely. And you also can subscribe a voice mailbox to receive voicemails. Please contact your service provider for details. In the standby mode, press Menu, select Messaging and then press OK key to enter the message menu interface. Notes: In the standby mode, press the Right soft key to enter Messaging. New message Set a message service center number before you start sending messages.
Msg settings You must set up necessary SMS information before using message functions. Enter the Msg settings submenu: ¾ Templates: When editing messages, holding the * key can bring out the preset answer sentences. In this menu, you can edit or change these sentences. ¾ Message center: Input the short message service center number (You must obtain this number from your service provider.), and then press Save to store the number.
records, and you can choose to store in the SIM card or in the phone memory. Saved records will be listed in the contact list and ordered by the first character of the name. Press the Left/Right keys to switch among groups. Press the OK key to view the detailed information of a record. In the viewing interface, press the Dial key to dial the number.
Details In the contacts list interface, press Options and select Details. You can check the detailed information of the selected record. Settings Ringtone: You can set different alert rings for different groups. Save No. to: You can select SIM card/ Phone/Select to save numbers. Used space: You can view the number of the saved records and the maximum number of the records in the SIM card and the phone memory. Speed dial list: You can check the set speed dial list.
Minute minder: Choose to remind you 5 or 15 seconds ahead of every minute when answering the incoming call, or selects Always off. Connected minder: Select to turn on/off the alert ring when the dialed call is connected. Call waiting: Select Activate/Deactivate to enable/disable this function; select Checking availability to query the current status of this function. When enabled, the network will notify you of a new call if a new incoming call takes place during the current conversation.
z Voice calls: Only restrict voice calls. z Data: Only restrict data. z Fax: Only restrict faxes. z Messages: Only restrict short messages. z All except messages: Restrict other services except short messages. When you have set types of restriction services, the following can be chosen: ¾ z Activate: The restriction is functional. z Deactivate: Delete the restriction. z Checking availability: Query if the restriction is set.
Character Chart Refer to the table below for more information on the characters available using the keys. key Corresponding Characters 1 1 and some common symbols 2 ABCabc2 3 DEFdef3 4 GHIghi4 5 JKLjkl5 6 MNOmno6 7 PQRSpqrs7 8 TUVtuv8 9 WXYZwxyz9 0 Space 0 * key Press * key to bring out symbols. # key Switch among different input modes. Up/Down key Roll the cursor up/down. Left/Right key Roll the cursor left/right.