ZTE CORPORATION ZTE A611+ GSM Dual-band GPRS Digital Mobile Phone User Manual 1
Copyright © 2008 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE operates a policy of continuous development. We reserve the right to update the technical specifications in this document at any time without prior notice. Release V1.
FCC COMPLIANCE STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Contents GENERAL INFORMATION ................................................................................................................ 5 WELCOME ............................................................................................................................................. 5 SECURITY .............................................................................................................................................. 5 SAFETY PRECAUTIONS ...........................................
Voice Mail Server ....................................................................................................................... 14 Broadcast Message .................................................................................................................. 14 PHONE BOOK ...................................................................................................................................... 14 TOOLKIT...............................................................................
Do not touch the antenna when the phone is in use. Touching the antenna area affects call quality and may cause the phone to operate at a higher power level than needed. Some people may be susceptible to epileptic seizures or blackouts when exposed to flashing lights, such as when watching television or playing video games.
Do not remove, install, or charge batteries in such areas. Spark in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. To avoid possible interference with blasting operations, switch off your phone when you are near electrical blasting caps, in a blasting area, or in areas posted “Turn off electronic devices.” Obey all signs and instructions.
Getting Started Key Definition Up/Down/Left/Right (Scroll) keys OK key Left soft key Right soft key Dial key End key 0-9 Number keys * key # key Note: In this manual press a key means you press a key and then release it; hold a key means you press a key and hold on for two seconds or more.
Mute Vibration New message; no space for messages when blinking Battery charge level Technical Parameters Handset Type ZTE A611+ Dimensions(L×W×H) 93 mm×47.8 mm×15.9 mm Weight Approx. 80 g (with battery) Battery Continuous standby time Approx. 120 hours - 150 hours (subject to network status) Continuous talk time Approx. 2 hours – 3 hours (subject to network status) For other parameters about battery and charger, refer to their labels.
Inserting & Removing SIM Card Switch off your phone, disconnect the outer power source and remove the battery. Warning: It is forbidden to insert or remove the SIM card when it is on or connected to an outer power source. Insert the SIM card into the SIM card slot or pull it out from the slot. Switching on/off Your Phone Hold the End key to power on/off the phone.
¾ DTMF: Set On/Off to send or stop send DTMF. Note: Some options can only appear in special cases. Options such as Swap will appear only when the ongoing call and the hang-on call coexist. Function Menu Usage and Structure of Function Menu Scrolling search function: Enter the function main menu by pressing Menu or the OK key in the standby mode. Press the Up/Down/Left/Right keys to select in menu.
¾ Language: Select the language for the display texts. ¾ Display Characteristic: Set a series of display Characteristics. ¾ Speed Dial: Set the speed dial keys and enable or disable this function. ¾ Flight Mode: Set the mode for a flight. ¾ LCD Backlight: Set the parameter for the backlight. ¾ KeyBacklight: Activate or deactivate the key backlight.
SMS Set a message service center number in Message Settings-Profile Setting before sending messages. ¾ ¾ Write Message: Create new SMS. Inbox: You can read the received messages. In the Message Body interface, you can press Option to make more operations. ¾ Outbox: If you select Save and Send, the successfully sent out SMS will be saved in Outbox. In the Message Body interface, you can press Option to make more operations. ¾ Message Settings: You can set some parameters according to the display.
z Read Report: Select whether or not to send a read report. z Delivery Report: Select whether or not to send a delivery report. Server Profile You can set up to 10 profiles. For the content to fill in, please consult the network service provider. Memory Status View the memory status. Voice Mail Server You can edit a server. Select Connect to check the voicemail box and listen to the voice message. Broadcast Message Set Receive Mode, Languages and Channel.
key [OK] or the OK key to get results. Note: This calculator has limited accuracy and rounding errors may occur especially in long division. Currency Converter Input the Rate, press OK and input a figure, and then press OK to get the result. Services STK This service needs the network service provider to provide. If neither SIM card nor the network service provider supports this service, this service will not be available. For more information, please consult the network service provider.
Press the key labeled with the required letter z Once for the first letter z Twice for the second letter z And so on To insert a space, press the 0 key once. To delete letters, press the Right soft key. Press the * key to open a list of special characters, use the Scroll keys to move through the list, and press the OK key to select a character. 123 Mode The 123 mode enables you to input numbers in a text message. Press the keys corresponding to the required digits.
Input the PIN or input the new PIN if you have changed the code. The code can be set “off” if you do not want to input. 2. “Insert SIM” is shown when the phone is switched on. Turn off your phone and make sure that you have inserted a valid SIM card. 3. “Enter Phone Lock” is shown when the phone is switched on. Enter the handset lock code. 4. No key tone volume when pressing keys. Check the keypad tone in User Profiles-Customize. 5. No incoming ring tone.