User's Guide

CDMA2000 1X EV-DO Wireless Data Terminal User
Guide
Installation Guide
Install
1.
Please connect Data Terminal to PC through USB interface. You could use the data cable to
connect.
2.
The installation driver will automatically run. Please install according to the installation
wizard.
3.
The system will automatically find new hardware and install the driver. Wait for a while.
Click “Finish” after the installation is completed.
Note:
Please connect the Data Terminal and PC with USB extension cable under weak signal to
obtain the optimal performance. If necessary, adjust the Data Terminal's position.
Uninstall
4.
Select Start All Programs Cricket Broadband Uninstall Cricket Broadband,
and you will be asked if you want to remove the program. Click “Yes”.
5.
Please wait and then click “OK” when un-installation is completed.
Descriptions of icons
The icons on the interface:
INTERNET EMAIL
CONNECTION
LOG
TEXT
MESSAGE
The icons on the Status Bar:
CDMA 1X
1X indication Connection indication
EVDO Rev.0/
Rev.A
EVDO network indication Unread message indication
Signal strength indication,
the more bars there are, the
stronger the signal is.
CDMA network unavailable
NetConnect
1. Click to connect the internet. Once connected, the “Connect” button will change
to “Disconnect”.
2. Click to disconnect from Internet.
3. Please connect the Data Terminal and PC with USB extension cable under weak signal to obtain the
optimal performance. If necessary, adjust the Data Terminal's position and the antenna's direction.
ZTE Corporation 6 http://www.zte.com.cn