CDMA 1X/EV-DO Wireless data Terminal CDMA 1X/EV-DO Wireless data Terminal User Guide This User Guide is used for Wireless Data Terminal of AC60. ZTE Corporation 0 http://www.zte.com.
CDMA 1X/EV-DO Wireless data Terminal Copyright Statement Copyright © 2009 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this manual without prior notice.
CDMA 1X/EV-DO Wireless data Terminal Table of Contents 1 :Safety Warnings and Precautions .............................................................................................. 3 2 :Descriptions of icons ................................................................................................................. 3 3 :Access the Internet ....................................................................................................................
CDMA 1X/EV-DO Wireless data Terminal Thank you for choosing the ZTE-AC60 CDMA Mini Router hereinafter referred to as Router. The router works in CDMA/1X/EVDO network. The client devices could connect to it via USB or Wi-Fi interface. The router supports data and SMS services, enabling you to communicate anytime and anywhere. 1 :Safety Warnings and Precautions Use the original accessories or those authenticated by the manufacturer.
CDMA 1X/EV-DO Wireless data Terminal Manual connected mode 3 :Access the Internet 1. Switch on the Router. 2. Establish a connection between your device and the client. 3. After successfully establishing the connection, the client can access the Internet automaticlly. Note： The default connection mode is Automatic. You can browse the WebGUI Configuration page and click Settings >Network Settings to set the WAN connection mode. 4 :Access the WebGUI Configuration Page 1.
CDMA 1X/EV-DO Wireless data Terminal Note： The parameter settings may have been preset by your service provider, and you will enjoy your Internet service directly. Please contact your service provider for details if you want to do some modification. 8: NetWork Setting Select the WAN Connection Mode and Network Preference. 9: WIFI Setting View the current station list, change the basic wireless network settings, choose security mode (NO ENCRYPTION or WPA-PSK/WPA2-PSK), WPS type and set Wi-Fi sleep time.
CDMA 1X/EV-DO Wireless data Terminal 10: Advance View the current status of your device, change the Administrator Settings, restore factory defaults, manage PIN or set the LAN interface configuration. ZTE Corporation 6 http://www.zte.com.
CDMA 1X/EV-DO Wireless data Terminal 11 :Firewall Set the Mac/IP/Port Filtering, Port Forwarding or the System Security configuration. ZTE Corporation 7 http://www.zte.com.
CDMA 1X/EV-DO Wireless data Terminal 12 : Ap Station You can set SSID, select on/off to enable/disable the default data connection and select the WLAN mode, security mode and encrypt type. ZTE Corporation 8 http://www.zte.com.
CDMA 1X/EV-DO Wireless data Terminal Note： Make sure that you can remember the new password if you change the login password by selecting Settings > Advanced > Management. Please restore the device to the factory default settings in case you forget the new password. 13 : SleepMode When you active Wi-Fi function and use battery to support the device, once no user connected to AR918B within 10 minutes, the device will enter sleep mode, and the screen will be turned off.
CDMA 1X/EV-DO Wireless data Terminal Turning off the device can also terminate the internet connection. 15 :Phonebook This function allows you to store contacts to your device or RUIM card. After logging in, select Phonebook, and you can add a new contact by clicking the Add New Contact tab, and perform operations to the contacts in the Device or RUIM Card tab. 16 : SMS This function allows you to view, send and receive short messages.
CDMA 1X/EV-DO Wireless data Terminal 1. You are in the place where there is no CDMA/1X/ EVDO network coverage. Such places 1. Change location to find a good where having include underground parking signal. garages, tunnels, and some remote rural areas. After restarting the 2. The device is not properly 2. Close the device safely as usual, pull out the computer, there is no connected. device and reinsert the device again. signal indicated. 3. The RUIM card isn't inserted 3.
CDMA 1X/EV-DO Wireless data Terminal 20 : FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
CDMA 1X/EV-DO Wireless data Terminal For this device, for usage near the body is 1.43 W/kg. While there may be differences between the SAR levels of various device and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level.
