User's Manual

WCDMA Module
10
2.8 +GCAP Capabilities List +GCAP
Description This command gets the complete list of capabilities.
AT+GCAP +GCAP: +CGSM, +CIS707-A, +MS, +ES,
+DS, +FCLASS
OK
Command
+ CGREG =? +CGREG: (list of supported <n>s)
Defined values
2.9 +CMEE Repor Mobile Equipment Errors
Description This command disables or enables the use of the “+CME ERROR : <xxx>” or
“+CMS
ERROR :<xxx>” result code instead of simply “ERROR”. See chapter 20 (MS
Error Result
Codes) for +CME ERROR result codes description and chapter 20 (Message
Service Failure
Result Codesfor +CMS ERROR result codes.
+ CMEE =[<n>] OK
+ CGREG =? CMEE: (0,1,2)
Command
+ CGREG? +CMEE: 2
OK
Defined values 0 Disable MS error reports, use only « ERROR »
1 Disable MS error reports, use only « ERROR »
2.10 +ZHWV Request hardware revision identification
Description Execution command causes the TA to return hardware revision identification
+ ZHWV <revision>
+ ZHWV: <err>
Command
+ ZHWV=?
Defined values