User's Manual

WCDMA Module
11
2.11 +ZDRNT Request status of dormant
Description Execution command causes the TA to return status of dormant
+ ZDRNT 1
+CME ERROR: <err>
Command
+ ZDRNT = ?
Defined values 0: MT is dormant
1: MT is not dormant
2.12 +ZSSPA Request System Status and System Parameter
Description Execution command causes the TA to return system status and system
parameter
+ ZSSPA ROAM:,RSSI:,SIM:,SRV:
+CME ERROR: <err>
Command
+ ZSSPA = ?
Defined values ROAM:ROAM_STATUS_OFF(0),ROAM_STATUS_ON(1),ROAM_STATUS_BL
INK(2),
RSSI: 0－5
SIM: SIM_STATE_AVAILABLE(1), SIM_STATE_NOT_AVAILABLE(0)
SRV: 0:No service,1:Limited service, 2:Service available,3:Limited regional
service ,4:MS is in power save or deep sleep
2.13 +ZMDS Request System Set Network Mode
Description Execution command causes the TA to select system mode:AUTOMATIC,GSM
OLNY,WCDMA OLNY
+ ZMDS=<MOEE> +ZMDS:OK
+CME ERROR: <err>
+ ZMDS = ? (list of supported <n>s)
Command
+ ZMDS? n
ok
Defined values 4:automatic network mode
13:gsm olny
14:wcdma olny
2.14 +ZGMS Request System Service Type
Description Execution command causes the TA to return me to surport the service type
Command +ZGMS +ZGMS: DS:1,VS:1,SS:1,PS:1
+CME ERROR: <err>