User manual

Warning! Use only ZTE-approved chargers and cables. The use of
unapproved accessories could damage your phone or cause the
battery to explode.
Caution: Do not attempt to change the built-in rechargeable
battery yourself. The battery can only be changed by ZTE or a
ZTE-authorized service provider.
Note: Use the USB Type-C™ charger that comes
in-box with your phone to charge the battery.
It’s specially built to support Qualcomm
®
Quick Charge™ 3.0.
1. Connect the adapter to the charging port.
2. Connect the charger to a standard AC wall
outlet. If the phone is on, you’ll see a charging
icon, such as or , appear in the Status Bar.
3. Disconnect the charger when the battery is
fully charged.
Note: If the battery is extremely low, you may be unable to power
on the phone even when it is being charged. In this case, try
again aer charging the phone for at least 20 minutes. Contact
customer service if you still cannot power on the phone aer
prolonged charging.
8 GETTING STARTED
This device contains a nonremovable battery. Attempting
to remove will void your warranty and could cause serious
injury. Do not damage, alter, or try to remove the battery.
If the battery is low, there will be a pop-up message on the
screen. As you charge your phone, the screen will show you the
exact battery level on the Status Bar.