User manual

173
of 10 mm. Although the SAR is determined at the highest
certified power level, the actual SAR level of the device while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power
levels so as to use only the power required to reach the network.
In general, the closer you are to a wireless base station
antenna, the lower the power output.
The exposure standard for wireless devices employing a unit of
measurement is known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg and 1.6 W/kg by
Industry Canada.
This device is in compliance with SAR for general population
/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and
Canada RSS 102 and had been tested in accordance with the
measurement methods and procedures specified in IEEE1528
and Canada RSS 102. This device has been tested and meets
the FCC and IC RF exposure guidelines when tested with the
device directly contacted to the body.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC and can
be found under the Display Grant section of
www.fcc.gov/oet/ea/fccid after searching on FCC ID:
SRQ-ZTEA1R.
For this device, the highest reported SAR value for usage
against the head is 0.66 W/kg, for usage near the body is 1.01
W/kg, and for simultaneous transmission use is 1.14 W/kg.