User manual

13
2. Pull out the card tray and place the nano-SIM card and the
microSDXC card on the tray, as shown. Carefully slide the
tray back into place.
Charging the Battery
Your phone’s battery should have enough power for the phone to
turn on, find a signal, and make a few calls. You should fully
charge the battery as soon as possible.
If the battery is low, there will be a pop-up message on the
screen. As you charge your phone, the lock screen will show you
the exact battery level on the status bar.
 WARNING!
Use only ZTE-approved chargers and cables. The use of
unapproved accessories could damage your phone or cause the
battery to explode.
nano-SIM
card
microSDXC
card
14
 WARNING!
Do not remove the back cover. The battery is not removable.
Removal may cause fire or explosion.
1. Connect the adapter to the charging jack. Ensure that the
adapter is inserted with the correct orientation. Do not force
the connector into the charging jack.
2. Connect the charger to a standard AC power outlet. If the
phone is on, you’ll see a charging icon, such as
or ,
appear on the status bar.
3. Disconnect the charger when the battery is fully charged.
NOTE:
15
If the battery is extremely low, you may be unable to power on
the phone even when it is being charged. In this case, try again
after charging the phone for at least 20 minutes. Contact the
customer service if you still cannot power on the phone after
prolonged charging.
Powering On/Off
 Press and hold the Power key to turn on your phone.
 To power off, press and hold the Power key to open the
options menu and touch Power off.
NOTE:
If the phone freezes or takes too long to respond, you can press
and hold the Power key for about 10 seconds to restart the
phone.
Setting Up for the First Time
When you first power on your phone after you purchase it or
reset it to factory settings, you need to do some settings before
using it.
Touch the language field to select the language. Then follow the
prompts to set up Wi-Fi, Google account, Google location and
other options.
16
Locking/Unlocking the Screen and
Keys
Your phone allows you to quickly lock the screen and keys (put
the phone to sleep mode) when not in use and to turn the screen
back on and unlock it when you need it.
To lock the screen and keys:
To quickly turn the screen off and lock the keys, press the Power
key.
NOTE:
To save battery power, the phone automatically turns off the
screen after some time of inactivity. You will still be able to
receive messages and calls while the phone screen is off.
To unlock the screen and keys:
1. Press the Power key to turn the screen on.
2. Swipe up on the screen.
- or -
Swipe from
to open the Phone app, or swipe from to
open the camera.
- or -
Touch a notification twice consecutively to open the related
app.
NOTE:
If you have set a fingerprint, an unlock pattern, a PIN or a