User manual

46
Connect to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to
add your phone to the access points that support WPS.
You can use one of the following methods to connect your phone
to a wireless network using WPS.
Method one: WPS button (Recommended)
1. Swipe up on the home screen and touch Settings > Network
& Internet > Wi-Fi.
2. Slide the switch to the On position.
3. Touch Wi-Fi preferences > Advanced > WPS Push Button.
4. Press the WPS button on the access point and the access
point will recognize your phone and add it to the network.
Method two: PIN
1. Swipe up on the home screen and touch Settings > Network
& Internet > Wi-Fi.
2. Slide the switch to the On position.
3. Touch Wi-Fi preferences > Advanced > WPS Pin Entry.
4. The WPS PIN displays on the screen. Enter the PIN into the
access point's setup page.
After entering the PIN, your phone automatically finds the access
point and configures the connection.
NOTE:
For detailed information about the WPS feature of the access
point, please refer to its user documents.