ZTE|Blade X8 Quick Start Guide MODEL: ZTE T0801 FCC ID:SRQ-ZTET0801
Specification MODEL ZTE T0801 CPU Type：MT8765 Chip Frequency：1.5GHz Storage RAM：2GB ROM：32GB Connectivity Network type：2G/3G/4G WIFI: 2.4G/5G 802.11a/b/g/n Bluetooth, GPS Frequency GSM：B2/3/5/8 UMTS: B1/2/4/5/8 LTE:B2/B3/B4/B5/B7/B8/B12/B17/B28AB/B 38/B40/B41/B66 I/O USB: USB Type-C 3.
Overview 1. TYPE-C 6. VOLUME+/- BUTTON 2. TF CARD 7. POWER BUTTON 3. SIM CARD 8. RESET 4. HEADPHONE JACK 9. REAR CAMERA 5. FRONT CAMERA 10.
Startup and Shutdown Startup Long press POWER key for three seconds, you can enter into startup picture. The system enters into screen lock status, please unlock it. Shutdown 1．Long press POWER, it will pop up shutdown window. 2．Shutdown window contains power off mode, restart mode and emergency mode three options. 3．Click power off is the last step. Turn on/off of the Screen Turn off the screen 1. Screen is turned off on its own if no operation happens for some time to save power. （Time can be set） 2.
Announcements Preventive maintenance ● Please always keep the tablet dry. To avoid the device short trouble, corrosion fault and electric short, please prevent the device, battery and charger from water and moisture, and don’t operate the device or charger by wet hand. ● Suggest to use matching charger and data cable in order to avoid abnormal charging phenomenon. ● To avoid failure of device, battery and charger, please prevent the device, battery, charger from violent shock or shake.
● Never use the tablet in the vicinage of high temperature, inflammable gas ( gas station). ● Protect the tablet and accessories from kids reach scope, and avoid the kids to use the tablet without parents’ supervision. ● Please comply with related rules and regulations, and respect others’ privacy and legal rights while using the tablet. ● Please strictly adhere to related instructions in the manual when using USB cable to ensure the safety of the tablet or PC.
Troubles Shooting 1. The first startup of tablet is slow After the tablet system upgraded, the first startup need to install the pre-installed application software, the lead time is around 2-3 minutes, the startup afterwards will be much quicker. 2. Tablet can’t connect Wi-Fi ● Make sure the wireless router of internet service can work in normal. ● Ensure the tablet and wireless router in certain distance, and no wall or other barrier between them. ● Ensure the user name and password both correct. 3.
FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
FCC RF Exposure Information (SAR) This tablet is designed and manufactured no t to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure near the body with the separation of 10 mm.
distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this device and your body.
