CAPTR II User Guide
Table of contents Safety.................................................4 About your device........................... 4 Before using your phone.................6 Handset description........................ 6 Battery usage.....................................7 Battery charging................................7 Battery handling information........ 8 Basic operation.................................9 Turning the phone on/off............... 9 Accessing the menu........................ 9 Using MyHomeScreen......
Safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. Power on safely Do not power on the device when and where prohibited or when it may cause interference or danger. Road safety comes first Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
Before using your phone Battery usage Handset description 1. Remove the battery cover from the unit. 1 Battery installation 12 2 6 3 4 5 7 8 9 10 14 16 15 17 Battery removal 1. To remove the battery, push down on the top of the battery while inserting your finger into the slot and pulling up from the back of the battery and slide it out. 13 11 1. Earpiece 2. OK key 3. Menu key 4. Speakerphone key 5. Send key 6. Navigation key 6 Before using your phone 2.
• The battery is not charged at the time of purchase. • Fully charge the battery before use. • It is more efficient to charge the battery with the handset is powered off. • Battery operating time gradually decreases over time. • If the battery fails to perform normally, you may need to replace the battery. Battery handling information Do’s • Only use the battery and charger approved by the manufacturer. • Only use the battery for its original purpose.
note • Navigation Key up : Messages • Navigation Key down : Browser • Navigation Key left : To scroll through the Widgets Menu. • Navigation Key right : To scroll through the Widgets Menu. Using MyHomeScreen (widgets) The MyHomeScreen menu (located at the bottom of the Idle screen) provides quick access to features like Weather, Weblinks, News, Mocospace, Horoscope, Personalize, My Account, Storefront and keeps them organized and always accessible. 1.
Wait/pause feature 3-way calling Call waiting function Pauses are used for automated systems (i.e., Voicemail, calling cards). Insert a pause after a phone number then enter another group of numbers. The second set of numbers is dialed automatically after the pause. This feature is useful for dialing systems that require a code. With 3-Way Calling, you can talk to two people at the same time.
During a call 1. Press the Left Soft Key Mute. • Mute (Unmute) : If you press Mute during a call, the person you are speaking with cannot hear you or any sounds from your side of the conversation. However, you can still hear them. note • To deactivate, press the Left Soft Key Unmute. • The phone will automatically unmute in Emergency Call or Callback Mode. 2. Press the Right Soft Key Options. • Voice Memo : To record a voice memo during a call.
There are 5 available modes: T9Word, Abc, ABC, 123 and Symbols. The input mode indicator appears on the lower portion of the display when letters and numbers are entered. To select the desired input mode, press the Right Soft Key Options, then choose from the list on screen. • Standard input mode : Use the digit keys to enter letters, numbers and characters. • T9 input mode : T9 mode incorporates a built-in-dictionary to determine a word based on the entered characters.
Messages 1. Press the Left Soft Key Menu > Messages > Send Pic Msg.. Send text message 2. U nder “Send To”, input the phone number. Press the Left Soft Key Next. To send a new text message: 1. Press the Left Soft Key Menu > Messages > Send Text Msg.. 2. Under “Send To”, input the phone number. Press the Left Soft Key Next. • Press the Right Soft Key Options. (Recent Calls, Contacts, Group Lists, Entry Mode) 3. Under “Enter Msg.”, input your message. • Press the Right Soft Key Options.
Drafts Call voicemail 3. Press the Right Soft Key Options. Draft Folder contains any draft messages. If message composition is interrupted by a voice call or other interrupting event, the text of the current composition is automatically saved in the drafts folder. 1. Press the Left Soft Key Menu > Messages > Voicemail > Call Voicemail. 4. Select “7. Save as Template” and press the OK Key. 1. Press the Left Soft Key Menu > Messages > Drafts. 2. Select a message then press the OK Key.
• Preset Msgs. : The preset messages are displayed. • Alert Time : To set Alert Time, Select “Once”, or “Every 1 Minute”. • Prompt Download : To set Prompt Download. Select “Auto” or “Manual”. Erase messages To erase all messages stored in your Inbox, Outbox, Drafts or Template folders. 1. Press the Left Soft Key Menu > Messages > Erase Messages. • Inbox : To erase all Inbox messages. • Outbox : To erase all Outbox messages. • Drafts : To erase all Drafts messages.
number for the speed dial location. The numbers will be displayed above the contact list. 5. Press the Left Soft Key Done to set the speed dial location. • Press the Right Soft Key Options. (Send Msg., Prepend, Erase) “Prepend” option is to allow you to add additional number prior to the phone number you want to call from Contacts when dialing. You can prepend the international dialing number, area code or calling card number before the phone number you try to call.
My images In my Images you can view all the images you have taken. 1. Press the Left Soft Key Menu > Multimedia > My Images. 2. Press the Navigation Key up, down, left or right to select your desired images, then press the Right Soft Key Options. 3. Select one of the following options: • Take a Pic. : Take a new picture. • Get New : To get new wallpapers and/or screensavers. Additional charges apply for downloads. note • Assign : Assigns image as wallpaper to a contact, main display or front display.
Navigation Key Left. 3. Select from “Browse catalog” and press the OK Key. The server will launch. Browse through the catalog and press the OK Key to select an application and price plan. Then follow the prompts to download the application. Repeat this process for each additional application. 4. T o exit “Games & Apps”, press the END Key. Tools Bluetooth Using Bluetooth wireless, you can connect the phone wirelessly to other Bluetooth devices, talk handsfree or control the phone remotely.
Service. 2. Press the Navigation Key up or down to select one of the following Services, then press the OK Key. (Headset/Hands Free/Object Push/ File Transfer) Information Displays the bluetooth information (Name, Address): 1. Press the Left Soft Key Menu > Tools > Bluetooth > Information. 2. View information. To return to the previous page, press the Right Soft Key Close. Send an image or a sound via Bluetooth 1.
3. To save an alarm setting press the Left Soft Key Save. • Set: Press the Navigation Key left or right to select alarm “On” or “Off”. • Time: Use the keypad to set a time for the alarm and the Right Soft Key to select am or pm. • Repeat: Press the Navigation Key left or right to select “Daily”, “Once”, “Mon to Fri” or “Sat to Sun”. • Snooze: Press the Navigation Key left or right to select “5 min”, “10 min”, “15 min” or “20 min”. • Ring Type: Press the OK Key to select a ringtone for the alarm sound.
5. Press the Right Soft Key Reset to reset the stopwatch. Unit converter To access the Unit converter: 1. Press the Left Soft Key Menu > Tools > Unit Converter. 2. Select the desired type of measurement, and then press the Down Key. (Length, Weight, Volume, Area, Temperature, Speed) Voice service Voice command To use Voice Command: 1. Press the Left Soft Key Menu > Voice Service > Voice Command. • Call : Use the Call command to voice dial a name from your Contact list or a phone number.
3. To start recording, press the OK Key Record. To stop recording, press the OK Key Stop button and to save your voice memo, press the OK Key Save button one more time. 3. P ress the Left Soft Key Set to save the setting. 4. To play voice memo, select the voice tag you want to play then press the OK Key. 2. S elect “Main Display” or “Front Display”. 1. Press the Left Soft Key Menu > Settings > Display > Incoming Calls. 3. S elect “Preset Images” or “My Images”. 2.
Brightness Volume 1. Press the Left Soft Key Menu > Settings > Display > Brightness. 1. Press the Left Soft Key Menu > Settings > Sounds > Volume. 2. Move the Navigation Key left or right to select the setting. 3. Press the Left Soft Key Set to save the setting. Sounds Ring Tone 1. Press the Left Soft Key Menu > Settings > Sounds > Ring Tone. 2. Select “Voice Calls”, “Messages” or “Voicemail”. • Preset Sounds: Select ringtone. • My Sounds: Select download Ringer. 3.
1. Press the Left Soft Key Menu > Settings > Call > TTY Mode. 3. Press the Left Soft Key Set to save the setting. note To select an answer mode: 1. Press the Left Soft Key Menu > Settings > Call > Call Answer. 2. R ead the message, then press the Left Soft Key Next. Change lock code 2. Select “Send Key”, “Any Key” or “Folder Open”. 3. S elect “TTY Full”, “TTY + Talk”, “TTY + Hear” or “TTY Off”. 3. Press the Left Soft Key Set to save the setting. 4.
Restrict”, “Speed Dials 1~10 Allow” or “Speed Dials 1~50 Allow”, then press the Left Soft Key Set to save the setting. Erase To erase all data in your phone: 1. Press the Left Soft Key Menu > Settings > Security > Enter your password. > Erase. The default Lock code is the last 4 digits of your phone number. note 2. Select “Contacts”, “Messages”, “Voice Memos” or “Download Contents”, then press the OK Key. 3. “Erase All?” will be displayed. Select “1. Yes” and press the OK Key. 4.
User memory 1. Press the Left Soft Key Menu > Settings > Memory Info > User Memory. 2. My Images, My Sounds, MMS or Game&Apps is displayed. 3. To return to the previous page, press the Right Soft Key Close. Base memory 1. Press the Left Soft Key Menu > Settings > Memory Info > Base Memory. 2. Contacts, Messages, Tools or Recent Calls memory is displayed. 3. To return to the previous page, press the Right Soft Key Close.
its normal temperature, moisture can form inside the device and damage electronic circuit boards. • Do not attempt to open the device other than as instructed in this guide. • Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. • Do not paint the device. Paint can clog the moving parts and prevent proper operation.
a. the Product has been subjected to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of Cricket, including damage caused by shipping. b.
specifications. 10. D isclaimer of Warranty.
Consumer, and supersedes all prior and contemporaneous agreements or understandings, oral or written, relating to the Product, and no representation, promise or condition not contained herein shall modify these terms. the agents, employees, distributors, and dealers of Cricket are not authorized to make modifications to this Limited Warranty, or make additional warranties binding on Cricket.
• Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical device when the wireless device is turned on. • Not carry the wireless device in a breast pocket. • Hold the wireless device to the ear opposite the medical device to minimize the potential for interference. • Turn the wireless device off immediately if there is any reason to suspect that interference is taking place. • Read and follow the directions from the manufacturer of their implanted medical device.
Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere, and obey all signs and instructions.
operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at.
reasonable protection against harmful Interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if Not installed and used in accordance with the instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation.
“Normal usage” in this context is defined as a signal quality that is acceptable for normal operation. The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous with the UT mark. The M and T marks are recommended by the Alliance for Telecommunications Industries Solutions (ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules. The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard.
