ZTE EuFi890 Quick Start Guide ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26779999 URL: http://www.zte.com.cn E-mail: mobile@zte.com.
LEGAL INFORMATION Copyright © 2011 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No.: 1.0 Edition Time: 05-2011 Manual No.
Quick Guide Introduction ZTE EuFi890 is the newly developed LTE global-mode mobile hotspot device. It can provide LTE/EVDO/UMTS/EDGE/GPRS flexible access for users to enjoy high-speed internet applications anytime and anywhere. EuFi890 has two work modes, Wi-Fi AP mode and USB Tethered mode. In Wi-Fi AP mode, up to 5 Wi-Fi enabled clients can connect to the device simultaneously. This quick guide provides the instructions on how to install and get started with the product.
ZTE EUFI890 Quick Guide Specification Data Service LTE-FDD: 50 Mbps DL; 20 Mbps UL CDMA 1xEV-DO: 3.1 Mbps DL; 1.8 Mbps UL HSDPA/HSUPA: 14.4 Mbps DL; 5.76 Mbps UL EDGE: 473.6 Kbps UL/DL GPRS: 171.2 Kbps UL/DL Interface Micro USB 2.0 and Wi-Fi Wi-Fi Standard 802.11b/g/n Wi-Fi Security WEP/WPA/WPA2 Weight TBD Dimension(L×W×H) 88.8 mm*88.8 mm*18 mm Battery 1800 mAh *Standby time 100 hours *Working time 4 hours Operate system Windows 7, Windows Vista, Windows XP (SP2 or later), MAC 10.
ZTE EUFI890 Quick Guide Getting to Know Your Device The following figure shows the appearance of the device, it is only for your reference. The actual device may be different. 1 5 2 6 7 4 3 Interface and Buttons 1. OLED Screen Displays the menus and the status of your device. 2. Up Button Scroll up to select the options. 3. OK Button Confirm the selection or operation. 4. Down Button Scroll down to select the options. 5. Power Switcher Power on/off your device. 6.
ZTE EUFI890 Quick Guide Icon Description Indicates the numbers of current Wi-Fi connections.
ZTE EUFI890 Quick Guide Hardware Installation Inserting SIM Card and Battery 1. Use the thumb catch at the bottom of the device to open the battery cover as shown. 2. Insert the SIM card into the SIM card holder as shown. 3. Insert the battery as shown with the contacts located against the metal springs, and then press the battery down into the case. 4. Line the battery cover up correctly and press gently to close the case.
ZTE EUFI890 Quick Guide Switching On/Off Your Device Slide the Power switcher to switch on/off the device. Notes: The device is powered on when the OLED screen lights up. Charging Your Device You can charge your device by using USB cable or adapter. 1. Insert the charger lead carefully with the plug arrow facing the bottom of the device. 2. The plug only fits one way. Do not use excessive force to insert the plug. 3. Make sure the plug is the right way round and lined up correctly and insert it gently.
ZTE EUFI890 Quick Guide Working Mode The client enabled Wi-Fi function could connect to your device via Wi-Fi mode, shown as the picture below.
ZTE EUFI890 Quick Guide Establishing a Connection between Your Device and the Client 1.Power on your device directly. It will take 1~2 minutes to initialize. 2. Use your normal Wi-Fi application on the client to search the available wireless network. Notes: You need to check your Wireless Network Connection. Set the client to obtain an IP address automatically in the Internet protocol (TCP/IP) properties, and the client will get an IP address like “192.168.0.100”. 3.
ZTE EUFI890 Quick Guide Accessing the Internet 1. Switch on the device. 2. Establish a connection between your device and the client. 3. After successfully establishing the connection, access the Internet in the Auto Connect, Manual Connect mode. The default mode is Auto Connect. Notes: You can browse the WebGUI Configuration page and select WAN Settings > WAN Connection to set the connection mode.
ZTE EUFI890 Quick Guide Accessing the WebGUI Configuration Page 1. Make sure the connection between your device and the client is correct. 2. Launch the internet browser and enter http://192.168.1.1 in the address bar. Notes: It is recommended that you use IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or later), Safari (4.0 or later) or Chrome (5.0 or later). 3.The login page appears as follows.
ZTE EUFI890 Quick Guide Notes: The SIM card will be locked if you enter wrong PIN code consecutively for three times. If you want to Change the PIN status or modify the PIN code, please select WAN Settings > SIM PIN to do the actions. Basic Setup After logging in, select Basic Setup > Quick Setup to the set the Wi-Fi settings, including SSID, Sleep Time, Security Policy and WPA. Select Basic Setup > Password to change the login password of the WebGUI Configuration page.
ZTE EUFI890 Quick Guide Router After logging in, select Router to config LAN interface, DHCP clients and DMZ settings. Wi-Fi Settings After logging in, select Wi-Fi Settings to config the connected devices, basic settings of Wi-Fi, the Wi-Fi security, accepted/denied MAC address of the Wi-Fi clients and view the wlan chip firmware version. Firewall After logging in, select Firewall to config the IP/port filtering, port forwarding and VPN connection.
ZTE EUFI890 Quick Guide Advanced After logging in, select Advanced to view the system information, WAN usage, restart your device and restore your device to the factory default settings.
ZTE EUFI890 Quick Guide SMS This function allows you to view, save, send and receive short messages. After logging in, select SMS to perform the related operations.
ZTE EUFI890 Quick Guide Disconnecting from the Internet 1.Log in the WebGUI Configuration page, and select WAN Settings. 2.Select WAN Connection > Manual Connect > disconnect_internet. 3.Click Apply. Notes: Turning off the device can also terminate the internet connection.
ZTE EUFI890 Quick Guide Usage of WPS If your client device supports WPS, you need not input the password manually after WPS has been available. Please do the following: 1. Start up your device. 2. Launch the client device connected to your device. 3. Select the WLAN information icon , and then choose Start WPS PBC to enable the WPS function of your device. 4. Enable the WPS function of the client. Notes: For the detailed operations about the client, please refer to the client‟s instruction.
ZTE EUFI890 Quick Guide Warning and Notice To the Owner • Some electronic devices are susceptible to electromagnetic interference sent by your device if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of your device before using if necessary. • Operating your device may interfere with medical devices like hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are turned on.
ZTE EUFI890 Quick Guide Warning: If the battery is broken, keep away from it. If it taints your skin, wash your skin with abundant fresh water and ask doctor help if necessary. Limited Warranty • This warranty does not apply to defects or errors in the Product caused by: i. Reasonable abrasion. ii. End User‟s failure to follow ZTE‟s installation, operation or maintenance instructions or procedures. iii.
ZTE EUFI890 Quick Guide Radio Frequency (RF) Energy This device meets the government‟s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government: The exposure standard for wireless mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
ZTE EUFI890 Quick Guide FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the manufacturer could void the user‟s authority to operate the equipment.
ZTE EUFI890 Quick Guide CITA Requirements a. Do not disassemble or open crush, bend or deform, puncture or shred. b. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard. c. Only use the battery for the system for which it is specified. d. Only use the battery with a charging system that has been qualified with the system per this standard.
ZTE EUFI890 Quick Guide How to Get Help You can get Help by: • Sending E-mail to mobile@zte.com.cn • Visiting http://www.zte.com.