Operation Manual

F107 User Manua
l
14
Confidential and Proprietary Information of ZTE CORPORATION
Making a Call from Messages
Making
a Speed Dial Call
1.
Open a message that
you have received.
2.
Use
to highlight the sender, or the numbers in the message. The highlighted number is
displayed in orange.
3.
Select
.
In the standby mode, hold the numeric key (1~9) corresponding to the phone number in the speed dial list
to make a call.
Notes:
The number key 1 and 2 are reserved for your voicemail number and videomail number.
1.
In the standby mode, select
and highlight a contact.
2.
Select
.
3.
Select a number between 3 and 9.
4.
Press
.
5.
Press
or
to exit.
To cancel a speed dial setti
ng, select the speed dial number and press
.
When there is an incoming call, you can press
to answer it or
to reject i
t. You
can also select
to mute the ringtone or reject and call and send a message to the caller, explaining
why you cannot answer.
Caution:
Adjust the volume of the earpiece to a moderate level to avoid injury to your ear.
After you have answered the call, the following options are available.
•
Press
to mute the call. The microphone will be turned off and the opposite party cannot
hear your voice. To turn on the microphone, select
.
•
Press
to turn on the speaker. To turn off the speaker, select
.
•
Press
for more options.
: Put the current call on hold or retrieve the call.
: End the call.
: Record the conversation.
: Enable or disable sending DTMF tone.
: Switch to
submenu during the call.
: Switc
h to
interface during the call.
: Switch to
submenu while on the phone.
Up/Down Key
Options > Use highlighted object > Voice call/Video call
Menu > Contacts
Options > Set speed dial
OK Key [Setup]
End Key
C/Back Key
Cancel
Send Key
Right Soft Key
Options
Right Soft Key
Unmute
OK Key [Loudsp.]
HF off
Left Soft Key
Hold/Active
End call
Record
DTMF off/DTMF on
Message
Messages
Contacts
Contacts
Browser
Browser
Set speed dial
Answering a Call
In
-
call Options
„
„
„
„
„
„
„