Operation Manual
20
Notes:
• The phone automatically switches off if the battery power is too
low.
• Make sure the charger’s connector is inserted correctly. Do not
force the connector into the port.
• The battery will remain fully charged for 3 to 4 hours.
• Only use the charger provided by the original provider. Using
an unapproved charger might be dangerous and violate the
authorization and warranty rules of the phone.
• If the phone is used too often when the battery is low or not
used for a long time, the screen may not display the charge
indicator until the battery has been continuously charged for 10
to 40 minutes.
• To get the maximum performance out of your battery, it
is recommended that you completely charge the battery
before using the phone for the first time. A new battery’s full
performance is only reached after three complete charge and
discharge cycles have been nished.
• Do not charge the battery if the temperature is under 0°C or
above 45°C.
Security Code
Handset Code
Handset password can protect your handset efciently and avoid
illegal usage. If handset password protection is activated, you
should input the correct password at handset start-up.
• For a new bought handset, the protection function is not
activated and the default password is 0000.
• In standby mode, select Menu > Settings > Security >
Activate security codes > Handset code to start or stop
password protection.