User manual
Table Of Contents
- Getting Started
- Personalizing
- Changing the System Language
- Setting the Date and Time
- Changing Ringtone, Notification or Alarm Sound
- Turning System Sounds On/Off
- Adjusting Volumes
- Switching to Vibration or Silent (Do Not Disturb) Mode
- Setting Silent (Do Not Disturb) Mode Preferences
- Applying New Wallpapers
- Setting the Home Screen Transition Effect
- Changing Screen Brightness
- Protecting Your Phone With Screen Locks
- Protecting Your Phone With Encryption
- Protecting Your Phone With Screen Pinning
- Knowing the Basics
- Connecting to Networks and Devices
- Phone Calls
- Contacts
- Messaging
- Camera
- Gallery
- Video
- Voice Recorder
- More Apps
- Settings
- Troubleshooting
- For Your Safety
10
Charging the Battery
Your phone’s battery should have enough power for the phone to turn on, find a signal, and
make a few calls. You should fully charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and USB cables. The use of unapproved accessories could
damage your phone or cause the battery to explode.
1. Connect the adapter to the charging port.
2. Connect the charger to a standard AC wall outlet. If the phone is on,
you’ll see a charging icon, such as or , appear in the Status Bar.
3. Disconnect the charger when the battery is fully charged.
NOTE:
If the battery is extremely low, you may be unable to power on the phone even when it is being
charged. In this case, try again after charging the phone for at least 20 minutes. Contact
customer service if you still cannot power on the phone after prolonged charging.
Powering Your Phone On/Off
Press and hold the Power key to turn on your phone.
To turn it off, press and hold the Power key to open the options menu. Touch Power off.