S202 GSM Mobile Phone User Guide ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China 518057 Tel: (86) 755 26779999 URL: http://www.zte.com.cn E-mail: mobile@zte.com.
LEGAL INFORMATION Copyright © 2010 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.0 Edition Time : Manual No.
Chapter 1 User Guide Security • To protect your mobile phone from illegal use, take the security measures as follows: Set PIN codes of the SIM card. Set handset lock code. Set call restrictions. Safety Precautions This section includes some important information on safe and efficient operation. Please read this information before using the phone. Operational Precautions • Please use your phone properly. When making or receiving a call, please hold your phone as holding a wireline telephone.
S202 GSM Mobile Phone User Guide Mobile Phone • Please use original accessories or accessories approved by the phone manufacturer. Using any unauthorized accessories may affect your mobile phone’s performance, damage your phone or even cause danger to your body and violate related local regulations about telecom terminals. • Turn off your phone before you clean it. Use a damp or anti-static cloth to clean the phone. Do not use a dry cloth or electrostatically charged cloth.
S202 GSM Mobile Phone User Guide the ground. • If the mobile phone has the function of automatic timing power-on, please check your alarm setting to make sure that your phone will not be automatically turned on during flight. Battery Use • Do not short-circuit the battery, as this can cause the unit to overheat or ignite. • Do not store battery in hot areas or throw it into fire. Otherwise, it will cause explosion. • Do not disassemble or refit the battery.
S202 GSM Mobile Phone User Guide The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 1.490W/kg and when worn on the body, as described in this user guide, is 0.684 W/kg (Body-worn measurements differ among phone models, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement.
S202 GSM Mobile Phone User Guide Take battery out 1. Remove the battery cover. 2. Press the battery side and lift it up to take it out from battery slot. 3. Put on battery cover. Make sure that cover is completely matched and the cover matching sound could be heard. Notes: Shut down all devices and cut the connection with charger when removing battery. Please use battery which is matched with this phone only. Charge battery Phone could be charged when phone is power off or power on.
S202 GSM Mobile Phone User Guide Notes: Battery indication will be displayed after several minutes if battery is over-discharged. Battery level indication bar Charging Charged Not enough battery alert Phone will give alert when battery is not enough and display a message of low battery on screen. Please charge battery when you receive the alert of low battery during calling in order to keep the calling. Insert / take out SIM card 1.
S202 GSM Mobile Phone User Guide Power on / off the phone Long press the Red key to power on. Long press the Red key to power off the phone at standby mode. Your phone Standby mode When the phone is ready to use but no operation on phone, then phone is under standby mode.
S202 GSM Mobile Phone User Guide SOS key Torch key Keypad lock key Volume keys Charging slot FM key Torch light Headset jack Main Display 1. Network signal 2. Status bar 3. Battery level 4. Service provider name 5. Time 6.
S202 GSM Mobile Phone User Guide Icon indication Battery level Network signal New SMS SMS full (blinking) Missed call Keypad locked Headset inserted New SMS when keypad is locked Missed call when keypad is locked New SMS and Missed call when keypad is locked Key functions Function Description Send key (Green key) Press to call out. Press to pick up phone when there is an incoming call. In standby mode, press to enter call list.
S202 GSM Mobile Phone User Guide Function Description Up key In standby mode, press to enter organiser. When operating, press to move cursor up. Down key In standby mode, press to enter main menu. When operating, press to move cursor down. # key In standby mode, press to input “#”. In SMS editing status, press to switch input mode. * key In standby mode, press to input “*”, “+”, “p” or “w”. In SMS editing status, press to use common symbols.
S202 GSM Mobile Phone User Guide you dial at the same time. Aid Volume: go to Settings > User Profiles > Personalise > Volume > In Call Volume. Select a number (1 to 7) and press the Green key. In a call, hold the “0” number and the volume will turn to the size of the number you set. Press the * key twice to input “+”. Press the * key for three times to input p symbol. Press the Green key to answer an incoming call, and press the Red key to end the call or reject a call.
S202 GSM Mobile Phone User Guide Settings Select Settings > User Profiles > Silent to select On or Off for Silent. Select Settings > User Profiles > Personalise to set Tone Setup, Volume and Alert Type. Select Settings > Phone Setup > Set Time to set time and date. Select Settings > Phone Setup > Set Home City to set the city you are in. Select Settings > Phone Setup > Schedule Power On/Off to set automatic power on/off time. Select Settings > Phone Setup > Language to set language.
S202 GSM Mobile Phone User Guide Radio Push the FM key to turn radio on or off under standby mode. Press the Green key to start to enjoy radio and press the Red key to stop it and press again to continue. Press Up/Down keys to turn up/down the channel number or input channel number directly to set the channel, and then press the Green key to confirm the channel. Press Volume keys to adjust the volume. Select Option > Channel List > Option > Play to play the selected channel.