Your phone at a glance Front camera Receiver ZTE Blade L315 User Manual Touch Screen Menu key Back key Home key Headset jack Flash Volume up/down key Back camera Noisereduction MIC Power/lock key Speaker Microphone USB port 1
Inserting the SIM card Inserting the memory card Please make sure that the phone is powered off before proceeding. The microSD card can be installed and removed while the phone is turned on. Unmount the microSD card before removing it. 1. Place your finger in the slot at the bottom of the back cover to lift and remove the cover. 2. Hold your micro-SIM card with the metal contacts facing down and slide it into the SIM card slot. 3. Press the cover gently back into place until you hear a click. 1.
Charging the battery Declaration of RoHS Compliance Connect the phone to the power outlet using the included USB cable and power adapter. We’re determined to reduce the impact we have on the environment and take responsibility for the earth we live on.
Health and safety 4FCC Regulations: This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
accordance with the measurement methods and procedures specified in IEEE1528. This device has been tested and meets the FCC RF exposure guidelines when tested with the device directly contacted to the body. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.
