User manual

2 3

TABLE OF CONTENTS continued

Camera and Video ..............................................18

Taking a Photo ................................................ 18

Recording a Video ............................................. 18

Playing Music ..................................................19

Connectivity .................................................. 20

Connecting with a

Bluetooth

Headset ...........................20

For Your Safety .................................................21

FCC RF Exposure Information (SAR) ............................. 21

FCC Regulations ..............................................22

Hearing Aid Compatibility (HAC) Regulations for Mobile Phones ....23

Distractions ...................................................25

Product Handling ..............................................26

Electrical Safety ............................................... 31

CTIA Requirements ............................................ 31

Radio Frequency Interference ..................................33

Explosive Environments ........................................34

Support ...................................................... 35

Warranty ..................................................... 36

SETTING UP YOUR PHONE

INSTALLING A microSDHC™ CARD

Power o your phone before installing or removing the

microSDHC card.

1. Place your ﬁnger in the slot at the lower left of the back

cover to lift and remove the cover.

2. If the battery is installed already, remove it.

3. Hold your microSDHC card with the metal contacts facing

down and slide it into the microSDHC card slot.

4. Install the battery.

Press the cover gently back into place until you hear a click.

CHARGING THE BATTERY

You should fully charge the battery as soon as possible. If

the battery is low, there will be a pop-up message on the

screen. As you charge your phone, the external screen will

tell you the exact battery level from the status bar.

WARNING! Use only approved chargers and USB Type-C

cables. The use of unapproved accessories could damage

your phone or cause the battery to explode.

1. Connect the adapter to the charging port.

2. Connect the charger to a standard AC wall outlet. If the

phone is on, you’ll see a charging icon, such as or ,

appear in the status bar.

3. Disconnect the charger when the battery is fully charged.