Introduction 1.1 Introduction This is a multi-mode 3G LGA module. It works in HSDPA/HSUPA/HSPA+/ UMTS/EDGE/GPRS/GSM networks. It integrates the functionality of a modem and a mobile phone (SMS), and combines mobile communication with Internet perfectly. It supports data, and SMS services through the mobile phone network, enabling you to communicate anytime and anywhere. 1.2 Functions Functions SMS, Data service, Applications management, A-GPS, etc. Network Standards.
measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help. 1.3 FCC Compliance This device complies with part 15 of the FCC Rules.
1.4 RF Exposure Your device contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. When you communicate with your device, the system handling your connection controls the power level at which your device transmits. Important safety information regarding radiofrequency radiation (RF) exposure. To ensure compliance with RF exposure guidelines the device must be used with a separation from the body.
2. Select the folder that you want to install the software by pressing the Change button, and then click the Next button.
3. The system shows the installation progress, wait a minute and click the Finish button to complete the installation.
Note: After the software is installed, pull out the modem before restarting the computer to avoid damages to your modem. If you have problems with the installation steps above, please contact your service provider or ZTE. After the installation, select Start > Programs > Connect Manager. You can find Connect Manager and Uninstall. There will be a shortcut icon on the desktop just as follows. 2.
You can also launch the application software by double-clicking the shortcut icon shown above. After the modem is initialized, the main interface of the connection manager appears. The standby icon working normally.
3 Functions & Operation 3.1 Interface introduction 3.1.1 Main Interface The following picture is the starting screen of the software. The whole interface is divided into four parts. Related functions can be executed by operation in the related areas. System information area Main menu button area Internet information area Function button area System information area Icons in this area show the system status and different kinds of tips.
Function button area There are five function button icons. SMS: Send, read and manage SMS. Phonebook: Manage contact information. Settings: Setting options for the device. Data records: Show connection information. Connect: Connect to the Internet. Main menu button area Click the icon to popup the following menu: Diagnostics: View Hardware information, Operational information and Network Settings. Help: Show the help document. Language: Change the language of the software interface.
Diagnostics: View Hardware information, Operational information and Network Settings. Help: Show the help document. Language: Change the language of the software interface. Exit: Close the software. 3.3 Connecting to the Internet With the help of your device, you can access the Internet and browse web pages while still be able to send and receive SMS. . The system will search for available networks Click the Connect button automatically. You can click Cancel button to cancel connection.
Internet information area. Then you can access the Internet and receive email etc, through the network. When the connection is established, the “Connect” button changes into the Disconnect button . Click it to disconnect from the Internet. 3.4 SMS Note: To make sure that the SMS can be used properly, please setup the correct SMS center number. Refer to section 3.6.4 SMS Settings. to switch to the SMS interface, which shows the number Click the SMS icon of SMS in your PC (LOCAL) and (U)SIM card.
Inbox: Save the received messages. Sentbox: Save the sent messages. Draftbox: Save the draft messages. Important: Save the important messages that you have moved from other folders. Deleted: Save the deleted messages. Report: Save the message reports. 3.4.1 Check SMS When an incoming message is received, a pop-up dialog box will appear above the taskbar. Click the Inbox button to check the new message. Click other buttons in the SMS window to view the messages in each folder.
The recipient’s number can be input directly or by clicking the To button and selecting contacts from the Phonebook. To send a message to multiple recipients, please separate each recipient with “;”. The SMS content can include 160 individual English characters (including English symbols). The total characters and the number of messages need to be sent are shown in the dialog box.
Save Number / Save Num: Save the sender’s number to Phonebook. Send: Send selected messages in Sentbox/Draftbox. Edit: Edit selected message in “Draftbox”. Export/Import: Export the SMS to CSV or import SMS from CSV. Save to Important: Move the SMS to Important folder. Revert: Move the SMS from Important or Deleted folder back to other folders. If you want to select several messages, hold “Ctrl” or “Shift” key and left-click on the items.
2. Select contact type (“PC” or “(U)SIM”) and input the information. Then click “OK”. 3.5.2 Modify contacts 1. Select a contact and click Edit. 2. Edit the contact information and click OK. 3.5.3 Delete contacts 1. Select one or more contacts and then click Delete. 2. Click OK to confirm. 3.5.4 Send SMS to contacts 1. Right click the selected contacts and select SMS. 2. Input message content in the new window and click Send. 3.5.5 Search for a contact 1. Enter the keyword in the search box.
2. Click Search to search for matching results, which will be displayed in the contacts list. 3.5.6 Other buttons Description If any contact is selected, you can execute any of the following by clicking on the corresponding button. View: View the selected contact’s information. Move: Change the location (PC or (U)SIM) where selected contacts information is stored. Right click on the contacts and you can create new contacts, view, edit, copy-and-paste, move, delete, export, or import selected contacts. 3.
1 Button description Add: Add new configuration files. View/Edit: View/edit the selected configuration file. The default configuration can only be viewed, not edited. Delete: Delete the selected configuration files. 2 Add new Configuration file Click the Add button to add new connection information to the system. There are two parts of configuration information: Common and Advance. The Common information includes Config File, APN and User name.
3.6.4 SMS Settings SMS center number: Set the message center number. You can use the default number preset by your service provider. The correct SMS center number must be input in order to use the SMS properly. If you want to edit it, please consult with your service provider for more information. SMS validity: Set the time limit for saving SMS in the network side. (This function needs network support.) You can select 12 hours, A day, A week or The longest period.
3.6.5 Sounds You can set Network connect alert, Network disconnect alert and SMS alert. These alerts will sound on the PC side. The audio file supports MP3, WAV, MID and WMA formats. Select Mute to mute corresponding alert. 3.6.
Enable or disable PIN code protection. Click the Change button to change the PIN code. Click the Apply button and input the PIN code to apply the security changes. Note: If the PIN code protection is enabled, you need to enter the PIN code every time you start to use the modem. 3.6.7 System Auto start when device is available: The software will start automatically when the device is available. Auto connect: Automatically connect to the Internet when the software is ready.
3.7 Data records Click the Data records icon to check the log of Internet connection history. In the Transfer Data tab, you can check the real-time upload/download speed, upload/download data and transfer time. You can also check the upload/download data and duration in one day, one month and one year. In the Data records tab, select start date From and end date To on top to view the record of data exchange in the given period. Select a record and click the Delete button to delete the record.
4 FAQ & Answers When you meet the following problems in service, please refer to the following answers to solve it. If the problems still exist, please contact with your suppliers. Problem Description After restarting the computer, there is no signal indicated. Sent Message failure. Date connection failed. Possible Causes 1. You are in the place where there is no network coverage. Such places include underground parking garages, tunnels, and some remote rural areas. 2.
Problem Description Connected to the Internet, but it cannot open any website page. Possible Causes 3. The APN in the user configuration file is incorrect. 4. The module data is corrupted. 5. The network type has been selected manually, but is incorrect. 1. After connection, you are unable to open web pages. 2. IE browser is causing problems. 3. Your operating system maybe infected by a virus.
5 Warning and notice 5.1 To the owner • Some electronic devices are susceptible to electromagnetic interference sent by the module if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of the device before using the device if necessary. • Operating of laptop and desktop PCs with the module may interfere with medical devices like hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are turned on.