IDU Let’s go Getting started with your device.
1. Prepare A set of installed ODU A network cable View the label on your device to get the default information. The following figure is for your reference only.
2. Connect the POE Adapter Use a network cable to connect the LAN-IN port on the POE adapter to the WAN port on your device.
3. Start Your Device Connect the power adapter to power on your device. If the ODU has already connected to the Internet, your device will connect to the Internet automatically.
4. Access the Internet Wi-Fi: The default Wi-Fi name (SSID) and password can be found on the device label. Connect to the Wi-Fi network with your mobile device and then access the Internet.
Network cable (RJ45): Connect with the computer via a LAN port and access the Internet.
5. Change Your Device Settings You can change the device settings by logging in to the IDU configuration web page. 1. View the label on your device to get the default Device Manager Website IP address and Password. 2. Launch the Internet browser. Enter the Device Manager Website IP address in the address bar. 3. Input the password and then click Login. 4. After the IDU configuration web page is opened, you can change the Wi-Fi SSID, password or other settings.
Telephone Your device supports the telephone function. Before using the telephone function, ensure that the ODU is working normally. To make a call: 1. Pick up the handset. 2. Dial the telephone number. 3. Wait for the call to be connected.
WPS Your device supports the WPS function. You can use this function to connect a client to your device. 1. Press the WPS button on your device to activate the WPS function. 2. Enable the WPS function on your client. 3. Follow the system prompts on your client to establish the connection.
Indicator Lights and Interfaces 10
1. POWER On: Power is on and external power supply is working normally. Off: Power is off or external power supply is working abnormally. 2. WIFI On: Wi-Fi works normally. Blinking: WPS is activating. Off: Wi-Fi is off. 3. SIG Blue on: Signal level panel. The ODU signal strength is from weak to strong. Off: The ODU isn’t connected. 4. WPS Press to activate the WPS function. 5. RESET Press and hold for about 3 seconds to restore factory default configurations. 6.
Troubleshooting Voice Related Problems Symptoms There is no dial tone. Possible Problems/ Solutions Please wait for 1~2 minutes after the device is turned on. If signal strength is weak, you have no good RF reception. Change the location of the device. The line is noisy/distorted when I lift the phone off the hook. I hear a rapid engaged tone as soon as I lift the phone off the hook. Remove any electrical appliance which is too close to the phone or your device.
Internet Related Problems Symptoms Possible Problems / Solutions I cannot access the Internet at all. Please check your configuration settings. Please wait 1~ 2 minutes for the device to initialize. Check your network indicators. The download or upload speed is The speed is dependent on signal strength. Check your very slow. signal strength and network type. I cannot visit the IDU configuration web page. I cannot establish the Wi-Fi connection between my device and the client.
Others Symptoms Possible Problems / Solutions For the Wi-Fi connection password, please check the label on the device. Please check the label on your device to get the default password of the IDU configuration web About the password page. If you changed the password and forgot the new password, you need to restore the device to the factory default settings.
Getting More Help You can get help by: Sending an email to mobile@zte.com.cn Visiting www.ztedevices.
LEGAL INFORMATION Copyright © 2021 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice.
Warning and Notice Safety Precautions • Some electronic devices may be susceptible to electromagnetic interference. Locate the device away from TV set, radio and other electronic equipment to avoid electromagnetic interference. • The device may interfere with medical devices like hearing aids and pacemakers. Consult a physician or the manufacturer of the medical device before using it. • • Please keep yourself at least 20 centimeters away from your device.
• Use the device within the temperature range of -20℃ ~ +55℃, and the storage temperature range is 40℃ ~ +70℃. The humidity range is 5%~95%. • Do not use your device during a thunderstorm. Remove the mains power pack from the wall socket. Limited Warranty This warranty does not apply to defects or errors in the product caused by: i. Reasonable abrasion. ii. End users’ failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii.
Radio Frequency (RF) Exposure This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm.
including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IC Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance 1.5 cm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
ZTE CORPORATION NO. 55, Hi-tech Road South, Shenzhen, P.R.
