Rogers Rocket Hub MF275R User Guide ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26779999 URL: www.ztedevice.com E-mail: mobile@zte.com.
LEGAL INFORMATION Copyright © 2015 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.
Contents Getting Started .................................................................................................................. 1 Appearance.................................................................................................................... 1 Indicators....................................................................................................................... 2 Installation Guide ..........................................................................................
IC................................................................................................................................. 35 Troubleshooting ..............................................................................................................
Getting Started The device operates on the 4G/LTE networks and supports voice and data service. Appearance 1. SIM Card slot Insert your micro-SIM Card. 2. Reset button Reset your device. 3. External antenna To get strength signal. 4. connector WPS button To activate the WPS function. 5. Phone Standard RJ11 connector for the telephone. 6. LAN Ethernet connector to computer. 7. Power Socket Connector to the external power supply. 8. Power Switch Turn your device on or off. 9.
ZTE MF275R User Guide Indicators Indicator State Power Green steady Off Voicemail Green blinking Off Green steady Green blinking Battery AC power present No AC power New voicemail waiting No new voicemail More than 50% discharging (charger not present) More than 50% charging (charger present) Yellow steady 20%-50% discharging (charger not present) Yellow blinking 20%-50% charging (charger present) Red steady Red blinking Off Wi-Fi Description Green steady Blinking Off Green steady Less than
ZTE MF275R User Guide Installation Guide Installing the micro-SIM Card and battery 1. Slide the back cover and remove it 2. Insert the battery. 3. Install the SIM Card.
ZTE MF275R User Guide WARNING! Switch off your device before installing or replacing the micro-SIM card. Your device do not support place or insert the micro-SIM Card while working. Your device only supports the micro-SIM Card. To avoid damaging the device, please use the card that comes installed or included in the box of the device. Connecting Your Device Please refer to the following picture for connecting to your device.
ZTE MF275R User Guide Switching on Your Device Press and hold the Power Switch to get started. Make sure that the phone is on hook before you power is on. NOTE: Do not put anything on the top of the device. Do not lay devices to overlap each other during usage. Power Supply For normal operation, connect the device to the external power adapter. In case of power failure or when there is no available external power supply, the device will not work.
ZTE MF275R User Guide 3. Right-click Wireless Network Connection and select Properties. 4. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
ZTE MF275R User Guide 5. Select Obtain an IP address automatically and Obtain DNS server address automatically, and click OK. Wireless Connection If you want to use Wi-Fi to connect to your device, please refer to the following steps. 1. Make sure that the Wi-Fi works normal. Please check the Wi-Fi Setting on the WebUI Configuration page or check the Wi-Fi indicator 2. . Use your normal Wi-Fi application on the client to search for the available wireless networks.
ZTE MF275R User Guide NOTE: Please set the client to obtain an IP address automatically, and the client will get an IP address like “192.168.0.100”. 3. Select the SSID of your device, and then click Connect. NOTE: Please check the label on your device to get the default SSID. 4. Input the password, and then click OK. NOTE: You may need to input the password for Wi-Fi connection. Please check the label on your device to get the default password. 5.
ZTE MF275R User Guide If you want to use WPS function to get the Wi-Fi connection, please: 1. Power on your device, and enable the Wi-Fi function on your device. 2. 3. 4. 5. Enable WPS function. Please check the WPS Setting on the WebUI Configuration page. Press the WPS button on your device to start Wi-Fi Protected Setup authentication process. Enable the WPS function on your client to respond this authentication process. Follow the system prompts on your client to finish the connection.
ZTE MF275R User Guide Note: If your phone does not have a Flash (or Talk) key, use the off-hook mechanism supported by your phone instead. Call Waiting Press *43# or #43# to enable or disable Call Waiting features. You will hear two tones if someone calls while you are already on a call. To hold the current call and accept the waiting call, press the Flash (or Talk) key. You can press the Flash (or Talk) key anytime to switch back and forth between calls.
ZTE MF275R User Guide 4. Wait for 3 seconds and until you hear a confirmation tone for the forwarding to complete before hanging up. Note: Press #67# to un-forward calls. Forward when unanswered 1. Press *61* on your connected phone. 2. Dial the 10-digit number to which you wish to forward your calls. 3. Press “#” key. Or press ** [DelaySec] #. Note: [DelaySec] represents the duration of no answer.
ZTE MF275R User Guide Retrieving Messages To retrieve voice messages, dial 1 on any home phone connected to your device and wait for four seconds to connect to your wireless voicemail box. Simply follow the voice prompts to listen to and manage your messages. (Alternately, you may dial your 10-digit home phone number to access your voicemail box.) WebUI Configuration Accessing the Configuration Page 1. Make sure the connection between your device and the client is correct. 2.
ZTE MF275R User Guide Login In the WebUI Configuration page, select the desired language and input the password (the default Password is admin). Click Login to log in the device. When you log in, the following interface appears: The whole interface is divided into three parts. Related functions can be executed by operation in the related areas. Index area: Show the configuration list for your device. Content area: Show the detailed configuration.
ZTE MF275R User Guide NOTE: To change the current settings, please disconnect from the network first. After changing the connection mode to Manual, you need to go to the Home page and click Connect to connect to the Internet. Network Selection Select Settings > Network Settings > Network Selection. You can set the device to search network automatically. Automatic: The device will search for the available network automatically. 4G Only: The device searches for 4G network only.
ZTE MF275R User Guide Set as default: Click to set current profile as the default profile. To add a new APN profile, follow the steps below: 1. Select Manual mode in the figure above. 2. Click Add New to access the following figure.
ZTE MF275R User Guide 3. Enter the related parameters (please see following table), and then click Apply to add a new profile. Parameter Function Mode If a fixed APN is provided by your service provider, select Manual APN. Otherwise, please select Auto APN, and the device will automatically obtain parameters. Profile Shows the profile. Profile Name Type the profile name. APN Type the APN string.
ZTE MF275R User Guide NOTES: The Profile Name and APN are mandatory, others are optional. If the Authentication is set to NONE, you don’t need to set the User Name and Password. Wi-Fi Settings Basic Settings Select Settings > Wi-Fi Settings > 2.4GHz / 5.0GHz, the wireless network basic parameters are shown in the following figure. 2.4GHz SSID Switch: Enable or disable 2.4GHz SSID function. Network Name (SSID): Service Set Identifier (SSID).
ZTE MF275R User Guide AP Isolation: When Enabled is selected, each of your wireless clients will not be able to communicate with each other. When Disable is selected, each of your wireless clients will be able to communicate with each other. Security Mode: The security modes are described below: Mode Description OPEN Authentication and encryption won't be performed. There are risks that private info will be intercepted or network will be used by unauthorized individuals.
ZTE MF275R User Guide All the clients connected to your device are shown in the Device Information area. Click Block behind the device you want to block and then it will be added to the black list. Click Delete to delete the device from the black list and then the device is unblocked. WPS Select Settings > Wi-Fi Settings > WPS, You can enable Wi-Fi Protected Setup (WPS) by PIN (PIN code) or PBC (push-button) mode, the two modes are described below: PIN:Enter the client PIN.
ZTE MF275R User Guide Device Settings Account Management Select Settings > Device Settings > Account Management, and the administrator settings information is shown in the following figure. You can change the administrator’s password. Click Apply to confirm your configuration. SIM PIN Management Select Settings > Device Settings > SIM PIN Management and the PIN management is shown in the following figure. • PIN Status: Shows the current PIN status and allows you to select PIN status.
ZTE MF275R User Guide Type the old PIN code, and then type twice the new PIN code. Click Apply to confirm your configuration. NOTES: • Three times consecutive wrong PIN code entries will block the micro-SIM card. • When you manage your PIN code, you need to disconnect the Internet first. • After you changed the PIN code, you don’t need to input the PIN code again. It is required after the device restarted.
ZTE MF275R User Guide SNTP Select Settings > Device Settings > SNTP and then you can set the device’s time manually or set the device to obtain time from SNTP server automatically. The default time set mode is Sntp auto Synchronization. Current Local Time: Shows current local time. Time Set Mode: Choose to set the time automatically or manually from the drop-down list. SNTP server 1/2/3: Choose SNTP server from the drop-down list. Time Zone: Choose your time zone from the drop-down list.
ZTE MF275R User Guide 2. Set the time and then click Apply to confirm your configuration. Update Management Select Settings > Device Settings > Update Management and the update management is shown in the following figure. If there is new update, please click Check button for checking new software immediately. Firewall A firewall protects your connected devices against malicious incoming traffic from the Internet. The firewall cannot be disabled, but the following settings are available.
ZTE MF275R User Guide If you select Enable, the filter settings will appear as shown below: Default Policy: Set how to handle the packet if none of the rules matches. Accepted: Internet traffic is allowed by default.
ZTE MF275R User Guide blocked from accessing the Internet. Traffic is identified by port numbers. In particular, you need to know the port numbers and the protocol (TCP, UDP) used by outgoing traffic. Dropped: Internet traffic is blocked by default. Only traffic from the selected pre-defined or custom applications is allowed to access the Internet. MAC Address: Set the MAC address that will be filtered. Source IP Address: Set the source IP address that will be filtered. Dest.
ZTE MF275R User Guide If you select Enable, the Virtual Server Settings will appear. IP Address: Set IP address for the virtual server. Port Range: Set port numbers for the virtual server. Protocol: Set protocol for the virtual server. Comment: Type comment for the virtual server settings. Click Apply to confirm your configuration.
ZTE MF275R User Guide Click Delete to delete the rule which you selected. To add a new rule: 1. Select Enable in the Port Forwarding area. 2. Click Apply. 3. Input the detail information in the Port Forwarding Settings area. 4. Click Apply in the Port Forwarding Settings area. URL Filtering You can set up content filter to restrict the improper content access.
ZTE MF275R User Guide Check Enable and click Apply to enable the function. DMZ The DMZ, or De-Militarized Zone, is a selected internal IP address of a device that allows full access and connectivity from outside traffic, through the firewall, to a specific internal device without being filtered or blocked by your device.
ZTE MF275R User Guide IP Address: IP address for LAN interface. Subnet Mask: Subnet mask for the IP address. DHCP Server: Enable or disable DHCP Server function. DHCP IP Pool: Allocate begin and end IP address for IP pool. DHCP Lease Time: Define how long the leased IP address will be expired. The new IP address will be relocated after the IP address is expired. Click Apply to confirm your configuration. Information This function allows you to view system information.
ZTE MF275R User Guide Statistics Select Information > Statistics and then the statistics information is shown in the following figure: Data Limit Settings Select Information > Data Limit Settings and then the following page is shown.
ZTE MF275R User Guide If you select Enable, the Data Limit Settings will appear. Limit by: Select a way to limit the data use, by data or time. Monthly: Set data limit for a month. If you set the limit by data, you need to select the data unit from the drop-down list; if you set the limit by time, you need to enter the time directly. Remind me: Set a percentage to remind you when the data/time reaches the specified percentage. SMS This function allows you to receive messages from your ISP.
ZTE MF275R User Guide Click Refresh to refresh manually. Operating Messages in micro-SIM Card You can check the messages saved in your micro-SIM card. SIM SMS Select Messages > SIM SMS to access the following figure: All the received messages saved in the micro-SIM card will be displayed here. Click Delete to delete the selected messages. Check the checkbox next to Delete to select all the messages in micro-SIM card and then click Delete to delete them.
ZTE MF275R User Guide Warning and Notice Safety Precautions • Some electronic devices may be susceptible to electromagnetic interference. Locate the device away from TV set, radio and other electronic equipment to avoid electromagnetic interference. • The device may interfere with medical devices like hearing aids and pacemakers. Consult a physician or the manufacturer of the medical device before using the device. • Please keep yourself at least 20 centimeters away from device.
ZTE MF275R User Guide iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the Product. iv. Modifications or repairs not made by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accidents, actions of third parties or other events outside ZTE’s reasonable control. vi. Usage of third-party products, or usage in conjunction with third-party products provided that such defects are due to the combined usage. vii.
ZTE MF275R User Guide RF Exposure Your device contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. When you communicate with your device, the system handling your connection controls the power level at which your device transmits. Important safety information regarding radiofrequency radiation (RF) exposure. To ensure compliance with RF exposure guidelines the device must be used with a separation from the body.
ZTE MF275R User Guide This device complies with IC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the IC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Cet appareil est conforme aux limites d'exposition aux rayonnements de la IC CNR-102 définies pour un environnement non contrôlé.
ZTE MF275R User Guide For more assistance, please: • Send an E-mail to mobile@zte.com.cn • Visit www.ztedevice.