MF286C Let’s go Getting started with your device. ZTE CORPORATION NO. 55, Hi-tech Road South, Shenzhen, P.R.
LEGAL INFORMATION Copyright © 2019 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.
Getting to Know Your Device External View NOTE: Please use the original external antenna if necessary. Indicators Indicator State Blue on Power is on and external power supply is working normally. Off Power is off or external power supply is working abnormally. Blue on Wi-Fi works transmission. Blue Blinking Wi-Fi works transmission. Off Wi-Fi works abnormally or the Wi-Fi function is disabled. Off The phone is not in use. Blue Blinking The phone is ringing.
Indicator State SIG Description Green Blinking The device is connected to the 2G/3G network and data is being transferred. Green Solid The device is registered to the 2G/3G network. Blue on Signal level panel. Strength is from weak to strong. Off There is no signal or no (U)SIM card is inserted. NOTE: The phone function needs the network support. Buttons Button Description RESET Press and hold for about 3 seconds to restore factory default configurations.
If you select a different operation mode, the connection of the LAN port will be different. Please refer to the chapter “Accessing the Internet”. If you want to use the mobile network to connect to the Internet or use your home phone, you need to insert your (U)SIM card first. Starting Your Device CAUTION: Your device must be placed in a well-ventilated environment. Do not cover the device. Slide the on/off switch to start your device.
Your device is connected to the terminal device via a network cable or Wi-Fi. The terminal device is set to obtain an IP address automatically. To access the Internet: 1. Launch the Internet browser and enter http://192.168.0.1 in the address bar. The login page appears. 2. Input the password and then click Login. NOTE: View the label on your device to get the default password. 3. View the current mode and click Change. 4. Select the operation mode which you want to use and then click Apply.
NOTE: If you change the operation mode, the device will be restarted automatically. 5. Set the detailed parameters for the operation mode. 6. Begin to enjoy your Internet service. Telephone Function Your device supports the telephone function. Before using the telephone function, connect the telephone and insert the (U)SIM card. To make a call: 1. Pick up the handset. 2. Key in the telephone number. 3.
1. Make sure that the Wi-Fi works normally. Please check the Wi-Fi Settings on the 4G CPE page or check the WIFI indicator. 2. Use your normal Wi-Fi application on the client to search for the available wireless network. NOTE: Please set the client to obtain an IP address automatically, and the client will get an IP address like “192.168.0.101”. For the detailed procedure, refer to Configuring Your PC. 3. Select the SSID (Network Name) of your device, and then click Connect.
Symptoms Possible Problems/ Solutions There is a prompt / phone alert / announcement as soon as I lift the phone off the hook. The line is noisy/distorted when I lift the phone off the hook. I hear a rapid engaged tone as soon as I lift the phone off the hook. Make sure your (U)SIM card is inserted correctly and the PIN number has been entered. If the PIN number has been entered incorrectly then you will need to enter the PUK code when prompted.
Warning and Notice Safety Precautions Some electronic devices may be susceptible to electromagnetic interference. Locate the device away from TV set, radio and other electronic equipment to avoid electromagnetic interference. The device may interfere with medical devices like hearing aids and pacemakers. Consult a physician or the manufacturer of the medical device before using your device. Please keep yourself at least 20 centimeters away from your device.
Limited Warranty This warranty does not apply to defects or errors in the Product caused by: i. Reasonable abrasion. ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the Product. iv. Modifications or repairs not made by ZTE or a ZTE-certified individual. v.
FCC Regulations: Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwo conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustaccept anyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. ThisdevicehasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice, pursuanttoPart15oftheFCCRules.
