User manual

ZTE MF288 User Guide
Confidential and Proprietary Information of ZTE CORPORATION 7
2. Select Settings > Connection Mode > Manual, and
then click Apply.
3. Select Home, and then click Connect or Disconnect.
NOTE:
If you want to modify the detailed parameters of your device, please log into the WebUI
configuration page by visiting http://192.168.0.1 or http://setup.zte. The default password is
admin.
Calling
Making a Call
Using a phone connected to your device allows you to place and receive calls as you
normally would. The device supports both cordless and corded phone dialing methods.
Note: Make sure to dial the 10-digit phone number, including area code.
Three-Way Calling
While on an existing call, press the Flash (or Talk) key on your phone to put the first party
on hold. When you hear a dial tone, dial the second party’s number (wait up to four
seconds).
When the second party answers, press the Flash (or Talk) key again to complete the
three-way connection. If the second party does not answer, press the Flash (or Talk)
key to end the connection and return to the first party.
NOTE:
If your phone does not have a Flash (or Talk) key, use the off-hook mechanism supported by
your phone instead.
Call Waiting
Press *43# or #43# to enable or disable Call Waiting features.
You will hear two tones if someone calls while you are already on a call.
To hold the current call and accept the waiting call, press the Flash (or Talk) key.
You can press the Flash (or Talk) key anytime to switch back and forth between calls.
To end the current call and accept the waiting call, enter “1” and press the Flash (or Talk)
key.