User manual

ZTE MF288 User Guide
10 Confidential and Proprietary Information of ZTE CORPORATION
WebUI Configuration
Accessing the Configuration Page
1. Make sure the connection between your devices is active (either by cable or WiFi).
2. Launch the Internet browser, and then enter http://192.168.0.1 (or other IP if you
have changed it from the default) or http://setup.zte in the address bar.
NOTE:
It is recommended that you use IE (8.0 or later), Firefox (31.0 or later), Opera (23.0 or later),
Safari (6.2 or later) or Google Chrome (36.0 or later).
3.
The login page will appear as follows.
Login
In the WebUI Configuration page, select the desired language and input the password (the
default Password is admin).
Click Login to proceed.
Settings
Do not modify any settings unless instructed by your service provider.
Network Settings
Connection Mode
Select Settings > Connection Mode.
You can set the connection mode here. The default mode is Automatic.