User manual

ZTE MF288 User Guide
32 Confidential and Proprietary Information of ZTE CORPORATION
Cet appareil est conforme aux limites d'exposition aux rayonnements de la CNR-102 définies pour un
environnement non contrôlé. Afin d'éviter la possibilité de dépasser les limites d'exposition aux
fréquences radio de la CNR-102, la proximité humaine à l'antenne ne doit pas être inférieure à 20 cm
(8 pouces) pendant le fonctionnement normal.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
Troubleshooting
Internet Related Problems
Problem Recommended Action
The device cannot access the Internet at all.

Please check your configuration settings.
 Please wait 1~ 2 minutes for the device to
initialize.

Check your service indicator LED’s.
The download or upload speeds are very slow. The speed is dependent on signal strength. Check
your signal strength and network type.
Failing to visit the WebUI configuration page

Enter the correct address. The default address is
http://192.168.0.1 or http://setup.zte.
 Only use one network adapter in your PC.

Do not use any proxy server.
Failing to establish a connection between your device
and a client through Wi-Fi

Make sure the Wi-Fi function is active.

Refresh network list and select the correct SSID.

Check the IP address to make sure your client
can obtain an IP address automatically in the
Internet protocol (TCP/IP) properties.

Type the correct network key (Wi-Fi password)
when you connect to the device.
About the password

For the Wi-Fi connection password, please
check the label on the device.

The default password of the WebUI configuration
page is admin.

If you changed the password and forgot the new
password, you need to restore the device to the
factory default settings.