User manual

Telstra MF65 User Manual v1.0 Page 12 of 30
Normally there is no need to change these settings unless you change
service provider.
The device is locked to Telstra. If you use a SIM card from another
provider you may not be able to connect to the network.
Consult your new carrier to obtain alternate APN details for your device.
SETTINGS > DEVICE SETTINGS > ACCOUNT MANAGEMENT
Use the Account Management settings to change the administrator
password if required.
The default password is password. If you have changed and forgotten
the password then you need to restore the device to factory defaults:
From the powered up state press and hold the power key and the WPS
key together for 8 seconds until the power LED goes off. The device will
reset.