MF700 HSPA+ TV Modem User Guide
Introduction The product is a multi-mode 3G modem that works on GSM/GPRS/EDGE/ UMTS/HSPA networks. With a USB interface connecting to your laptop or desktop computer, it supports data and SMS services through the mobile USB Modem network as well as mobile TV, helping you realize mobile communication and entertainment anytime and anywhere. Specification The following table shows the specification of your device. Interface Type USB 2.
microSD capability Notes: microSD Support up to 32 GB microSD card is a trademark of SD Card Association. Hardware Installation Installing the SIM/USIM Card 1. Remove the back cover on the modem. 2. Hold your SIM/USIM card with the cut corner oriented as shown and then slide it into the card holder with the metal contact s facing the modem. 3. Replace the back cover. Installing the Memory Card Only microSD card is supported by the modem and do not insert other memory cards into the modem.
Connecting the USB Modem to Your Computer Remove the modem cap and plug the modem firmly into a USB port on your computer. Software Installation On different operating systems, the software installation procedures may be different. Please follow the general guide below and the system prompts during installation. • For Windows XP, Vista and Windows 7 When you connect the modem to your PC correctly, the system automatically recognizes it as a CD-ROM and starts the software installation wizard.
The system will automatically display a CD-ROM on the desktop, when you connect the modem to your computer correctly. Copy and decompress the installation package from the CD-ROM to another directory. Root users can double-click the install.sh file and select Run in Terminal to start the installation. Non-root users can start Terminal and gain the root user privilege, then run the install.sh file in the Terminal.
Indication Modem Status Blue solid Registered to a network Blue blinking Active data transfer on the network Warning and notice To the owner • Some electronic devices are susceptible to electromagnetic interference sent by modem if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of the device before using the modem if necessary. • Operating of laptop and desktop PCs and the modem may interfere with medical devices like hearing aids and pacemakers.
Using your USB Modem • Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect your modem’s performance, and violate related national regulations about telecom terminals. • Avoid using the modem near or inside metallic structures or establishments that can emit electromagnetic waves. Otherwise it may influence signal reception. • The modem is not waterproof. Please keep it dry and store in a shady and cool place.
vi. Usage of third-party products, or usage in conjunction with third-party products provided that such defects are due to the combined usage. vii. Any other cause beyond the range of normal usage intended for the Product. End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the above-mentioned situations.
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
—Consult the dealer or an experienced radio/ TV technician for help. Health and safety information Radio Frequency (RF) Energy This model USB Modem meets the government’s requirements for exposure to radio waves. This USB Modem is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
The FCC has granted an Equipment Authorization for this model USB Modem with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model USB Modem is on file with the FCC and can be found under the Display Grant section of http://www.fcc.
Getting More Help You can get more help on how to use the device through the following ways. • Clicking the Help button ( the software. in Windows, • Sending E-mails to mobile@zte.com.cn • Visiting http://www.zte.com.