Quick Start Guide

Connecting to Your Device

Using USB Connector

Insert the device into your computer’s USB port securely. The

operating system automatically detects and identifies your device

and starts the installation wizard.

NOTE:

If the system does not automatically launch installation, you can

click the device installation icon in My Computer > ZTEMODEM

to install the software.

The 4G Mobile Hotspot configuration page will open

automatically, and then your computer will connect to your device

successfully.

Using Wi-Fi

1. Supply power to your device by connecting to your computer

or using other accessories.

2. Ensure that your computer or other client devices have

enabled Wi-Fi, and search for available wireless networks.

NOTE:

Refer to your Wi-Fi-enabled client device manual for further

details on how to search for wireless networks. If you use a

computer, you need to set your computer to obtain an IP address