Bluetooth Remote Control User Guide 1
About This Manual Thank you for choosing this ZTE device! Before using the remote control and the projector, please read this manual carefully and keep it for future reference. Copyright Copyright © 2015 ZTE CORPORATION All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.
Images and screenshots used in this manual may differ from the actual product. Content in this manual may differ from the actual product or software. Trademarks ZTE and the ZTE logos are trademarks of ZTE Corporation. Google and Android are trademarks of Google, Inc. The Bluetooth® trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such trademarks by ZTE Corporation is under license. Qualcomm® Snapdragon™ processors are products of Qualcomm Technologies, Inc.
Contents Getting Started .........................................................5 Getting to Know the Bluetooth 3 Remote Control ............... 5 Button Action ..................................................................... 6 Before you begin … .................................................8 LED Color Indicators ...............................................9 Product Specifications ..........................................
Getting Started Getting to Know the Bluetooth 3 Remote Control .
Button Action Button Function Power Turn the projector on and off Laser Laser pointer Up Move up on the screen Down Move down on the screen Left Move left on the screen Right Move right on the screen OK Choose the selection Return Return to previous screen Home Move to the home screen Menu Display the menu Back Select the previous video Play/Pause Stop and continue the video Forward Select the next video Volume Up Increase the volume Volume Down Decrease the volume 6
Place finger here and move cover up to insert two AAA batteries (included).
Before you begin … Before using the remote control with the Spro2, you must use Bluetooth settings to sync the remote control and the Spro2. To do so: 1. Press OK and the Home button for two seconds. The Spro2 displays available devices with which to pair. 2. Choose Spro Remote Controller. The remote enters rapid pairing mode and connects through Bluetooth to the projector. The green LED flashes three times to indicate connection success.
LED Color Indicators Status Replace batteries Red or Green LED Indicator Green LED stays bright for 2s Fast pairing Paring is successful when the green LED flashes Pairing failed when it times out and the green light turns off Conventional pairing Pairing is successful when the green LED flashes at an interval of bright for 1 second and off a half second. The green light turns off when pairing times out. Paired success state Green LED on for 2 seconds Working status Low battery state <2.
Product Specifications Working voltage range 2.1V -- 3.0V Low voltage 2.3V Automatic shutdown voltage 2.