ZTE 203Z /GL09P /MF98+ Let’s go Getting started with your device. ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.
ZTE MF98+ Getting Started LEGAL INFORMATION Copyright © 2013 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.
ZTE MF98+ Getting Started Appearance The following figure is only for your reference. The actual product may be different. Specification The following table shows the specification of your device. Interface Type USB 2.0 HIGH SPEED Systems supported Supports most types of laptop and desktop PC. Operating systems supported Windows XP, Vista, Windows 7 MAC Functions SMS service, Data service, Applications management, support microSD card, etc.
ZTE MF98+ Getting Started Dimension 110mm×67.5mm×18.6mm microSD capability Support up to 32GB microSD card Battery 5000mAh Charging mode USB or Adapter Charging time About 7 hours with adapter. About 15 hours with USB. Warning and Notice To the Owner • Some electronic devices are susceptible to electromagnetic interference sent by your device if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of your device before using if necessary.
ZTE MF98+ Getting Started • When not using the battery for a long period, remove it from your device and store it in a cool dry place. • Never use any charger or battery damaged or worn out. • Return the wear-out battery to the provider or put it in the appointed recycle place. Do not put it in familial rubbish. WARNING: If the battery is broken, keep away from it. If it taints your skin, wash your skin with abundant fresh water and ask doctor help if necessary.
ZTE MF98+ Getting Started Assessment of compliance of the product with the requirements relating to the Radio and Telecommunication Terminal Equipment Directive (EC Directive 1999/5/EC) was performed by PHOENIX TESTLAB (Notified Body No.0700), based on the following standards: Safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011 EMC EN301489-1 V1.9.2/-17 V2.2.1/-24 V1.5.1 EN 300 328 V1.7.1; Radio EN301908-1 V5.2.1 /-2 V5.2.1 /-13 V5.2.1 EN 301893 V1.7.
ZTE MF98+ Getting Started FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
ZTE MF98+ Getting Started compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and use such body-worn accessory should be avoided.
