MO-01J Quick Start Guide 1
LEGAL INFORMATION Copyright © 2016 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. Notice We offer self-service for our smart terminal device users.
Trademarks ZTE and the ZTE logos are trademarks of ZTE Corporation. Google and Android are trademarks of Google, Inc. The Bluetooth® trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such trademarks by ZTE Corporation is under license. microSDHC Logo is a trademark of SD-3C, LLC. Qualcomm® Snapdragon™ processors are products of Qualcomm Technologies, Inc. Qualcomm and Snapdragon are trademarks of Qualcomm Incorporated, registered in the United States and other countries.
Product Safety Information Don’t make or receive phone calls while driving. Never text while driving. For body-worn operations, maintain a separation of 10 mm. Small parts may cause choking. Your phone can produce a loud sound. To prevent possible hearing damage, do not listen at high volume levels for long periods. Avoid contact with anything magnetic. Keep away from pacemakers and other electronic medical devices. Turn off when asked to in hospitals and medical facilities.
Your phone may produce a bright or flashing light. Don’t dispose of your phone in fire. Avoid extreme temperatures. Avoid contact with liquids. Keep your phone dry. Do not attempt to disassemble your phone. Only use approved accessories. Don’t rely on your phone as a primary device for emergency communications.
Getting to Know Your Phone Auxiliary Microphone Proximity & Light sensor Earpiece 3.
Back camera Flash Speaker 7
Before Getting Started Installing the nano-UIM / nano-SIM / microSDHC Card Power off your phone before installing or removing the nano-SIM or microSDHC card. 1. Insert the tip of the tray eject tool into the hole on the card tray. 2. Pull out the card tray and place the nano-SIM card or microSDHC card on the tray, as shown. Then carefully install the tray back.
CAUTION: To avoid damage to the phone, please do not use other kinds of nano-UIM / nano-SIM cards, and do not use a non-standard nano-UIM / nano-SIM / card cut from a (U)SIM card. You can get the standard nano-UIM / nano-SIM card from your service provider. NOTE Slot2 only supports microSDHC card.
Charging the Battery Your phone’s battery should have enough power for the phone to turn on, find a signal, and make a few calls. You should fully charge the battery as soon as possible. WARNING! Use only ZTE-approved chargers and cables. The use of unapproved accessories could damage your phone or cause the battery to explode. CAUTION: Do not change the built-in rechargeable battery in your phone by yourself. The battery can only be changed by ZTE or ZTE authorised service provider. 1.
2. Connect the charger to a standard AC power outlet. 3. Disconnect the charger when the battery is fully charged. NOTES: If the battery is extremely low, you may be unable to power on the phone even when it is being charged. In this case, try again after charging the phone for at least 30 minutes. Contact customer service if you still cannot power on the phone after prolonged charging. The battery is not removable and do not remove the rear cover please.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: MO-01J(FCC ID: SRQ-MO-01J) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use close to human ear is 0.595W/kg, body-worn is 0.641W/kg, hotspot mode is 0.711W/kg. This device was tested for typical body operations at 1.0cm from the body.
Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirements. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.
