NX512J User Manual -1-
Copyright Statement Copyright © 2015 by Nubia Technology Co., Ltd. All rights reserved. The copyrights of this document are owned by Nubia Technology Co., Ltd. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of Nubia Technology Co., Ltd. Nubia Technology Co., Ltd.
Appearance Light/proximity sensor Receiver Front camera LCD Back key Home key Menu key Noise-reduction MIC Headset jack Flashlight Back camera NFC Sensing area Volume key Power Reset Lock key USB port Speaker MIC -3-
Inserting and removing a SIM card 1. Insert the card ejection tool into the small hole on your card tray; slightly press inward to eject the tray. 2. Install your SIM card on the tray and push it back to the original position. Please follow the step 1 above and take out your SM card when you need remove it. Your phone adopts nano-SIM card, which is a micro SIM card which functions the same as a normal SIM card. The dimensions of a nano-SIM card are 12mm*9mm. Note: 1.
Charing the battery Connect your charger to your phone using a USB cable, and plug in your charger to a standard power socket. Please pay attention to the direction of the USB port and insert the USB cable into your phone correctly. Note: Please do not dismantle the product by yourself. Contact your local after-sales distributor if necessary.
Health and safety FCC Regulations: This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm.
1.361 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level.
Declaration of RoHS compliance We’re determined to reduce the impact we have on the environment and take responsibility for the earth we live on. So this document allows us to formally declare that the nubia NX512J, manufactured by Nubia Technology Co., Ltd.
Disposal of your old phone 1. When the wheelie bin symbol is attached to a product, it means the product is covered by the European Directive 2002/96/CE. 2. All electrical and electronic products should be disposed of separately from normal household waste via designated collection points provided by government or local authorities. 3. The correct disposal of electrical and electronic products will help protect the environment and human health.
